Know the rules The Paceline Forum Builder's Spotlight


Go Back   The Paceline Forum > General Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 10-12-2024, 12:57 PM
zacstanley zacstanley is offline
Senior Member
 
Join Date: Oct 2012
Posts: 943
12 speed Campagnolo Chainrings on 10 Speed Veloce Crankset?

Anyone know offhand if the BCD on these silver crank arms are compatible with 12 speed chain rings? I have shifters and mechs but would like to keep the existing arms if possible. Thanks.

Below is the model:

https://chatnation494.wordpress.com/...peed-chainset/
Reply With Quote
  #2  
Old 10-12-2024, 01:03 PM
herb5998 herb5998 is offline
Senior Member
 
Join Date: Oct 2013
Location: Montreal, QC
Posts: 1,871
Late 11s and all 12s utilize a 4 bolt setup, so a 5 bolt crank will not work.
Reply With Quote
  #3  
Old 10-12-2024, 01:10 PM
zacstanley zacstanley is offline
Senior Member
 
Join Date: Oct 2012
Posts: 943
Thanks! I presume I can use a later speed, then?

Last edited by zacstanley; 10-12-2024 at 01:23 PM.
Reply With Quote
  #4  
Old 10-12-2024, 01:37 PM
dddd dddd is offline
Senior Member
 
Join Date: May 2016
Posts: 2,296
I have many times used older cranksets with later (narrower) chains, after simply applying a bevel to the inside of the chainring's teeth.

The bevel moves the tips of the teeth closer to the big ring, effecting narrower spacing where it counts.

Reply With Quote
  #5  
Old 10-12-2024, 01:42 PM
dddd dddd is offline
Senior Member
 
Join Date: May 2016
Posts: 2,296
Here, I broke all the rules by first fitting a complete 10s cassette onto an unmodified 7s freehub, then beveled the inner ring to work perfectly with 10s chain.
I've been using this build for over two years now with nary a hiccup:
Reply With Quote
  #6  
Old 10-12-2024, 02:52 PM
Mark McM Mark McM is offline
Senior Member
 
Join Date: Jun 2006
Posts: 12,663
Not only are there no 12spd chainrings to fit a Veloce crankset, there aren't any 11spd chainrings that fit, either. Veloce (plus Mirage and Centaur) "hidden 5th bolt" cranks used stamped chainrings, which are thinner than the machined chainrings on Athena, Chorus, Record and Super Record hidden 5th bolt cranks. Due to the hidden 5th bolt design, these cranks must use chainrings of of a specific width. Although Campagnolo made the thicker machined hidden 5th bolt chainrings in 11spd versions, they never made the thinner stamped hidden 5th bolt chainrings in 11spd - the stamped hidden 5th bolt chainrings stopped at 10spd.
Reply With Quote
  #7  
Old 10-12-2024, 03:34 PM
DfCas DfCas is offline
Senior Member
 
Join Date: Dec 2003
Posts: 1,673
Im using an FSA 10-11 crank and rings on a 12 speed Chorus setup. Works flawlessly. Have you tried yet?
__________________
No signature
Reply With Quote
  #8  
Old 10-12-2024, 06:19 PM
zacstanley zacstanley is offline
Senior Member
 
Join Date: Oct 2012
Posts: 943
Quote:
Originally Posted by DfCas View Post
Im using an FSA 10-11 crank and rings on a 12 speed Chorus setup. Works flawlessly. Have you tried yet?
Can you point me to the crank?
Reply With Quote
  #9  
Old 10-12-2024, 06:57 PM
DfCas DfCas is offline
Senior Member
 
Join Date: Dec 2003
Posts: 1,673
I'm not sure I can provide a link. I'm using a Gossamer triple as a sub compact double. I've used a 28 and 30 tooth inner, and a 42 and 46 in the middle position. 3 years noiw.
__________________
No signature
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:27 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.