what adhesive recommended for wahoo sensors?

[IJWS]

I have a couple of cadence sensors and I could not get the case to snap off to replace the batteries without removing the sensors and wearing out the perfectly shaped oval adhesive strips wahoo provides. I am embarrassed to admit that double-sided tape does not work. What should I look for on amazon for some stronger/thicker adhesive tape? What does the paceline recommend?

[.RJ]

you could use heat shrink or electrical tape to reattach the cadence sensor

[9tubes]

You might try 3M trim adhesive. It's sort of an industrial-strength rubber cement used to attach auto floor carpet and stuff. It's designed to be removable (like rubber cement it peels off) and doesn't mark/dissolve/damage paint or clear.

We used to use it to mount sew-up tires. I always keep a tube around for whatever comes up around the house.

[charliedid]

Tape like this two sided clear works. I forget the exact brand we have at work

https://www.amazon.com/Double-Sided-...KZK1TU7TG&th=1

[KevinC]

3M VHB
Should be available at auto parts stores and your local DIY

[November Dave]

Originally Posted by KevinC

3M VHB
Should be available at auto parts stores and your local DIY

This.

[chrisroph]

A two sided tape is the best option, sticks well, doesn't leave a permanent residue. Just clean both surfaces thoroughly before installation.

[IJWS]

Thank you all!

[Old School]

I put my wahoo cadence sensor on my shoe. Works great when you ride different bikes. I use the rubber thingie.

https://www.wahoofitness.com/media/c...ence_mount.jpg