#1
|
|||
|
|||
Pressfit BB30 installation?
My Seven Axiom is built with BB30. I installed the Stronglight 24mm “adaptor BB”
https://stronglight.com/produit/bb-30-24 I used a Raceface Cadence crank and the dust seals on the BB was a bit tight. Today when I removed the crank I had to give the axle a little dab to let go of the BB seals. The result was that the BB cup left the frame - maybe too much dab? I installed the cups with grease is that a no go and is some kind of Loctite the way? Or is it better to find one of those thereadtogether BB’s if the shell in the frame is just a bit “loose”? |
#2
|
|||
|
|||
It sounds like the fit on the spindle is tighter than the fit on the frame, which is not the way it should be. I have no personal experience with the Stronglight adapters, but the Wheels Mfg thread-together BB30-to-Shimano bottom brackets are great, and I would higher recommend them.
__________________
Instagram - DannAdore Bicycles |
#3
|
|||
|
|||
Quote:
A dab of loctite bearing retainer can help keep the PF30 bearing cup in the frame, but I wouldnt go nuts as you want to remove them later. |
#4
|
||||
|
||||
Praxis for the win, only BB that has a collet type action as well as screw together, I'm a huge fan.
__________________
Grumpy Old Shoe cycles |
#5
|
|||
|
|||
Another vote for the Wheel’s Mfg unit, so simplistic and quite easy to install.
|
|
|