#1
|
||||
|
||||
Is there an internal sleeve for Campy UT road BBs?
Ekar Pro-Tech has that internal sleeve between the cups.
Is there one for regular road UT BBs? I think I remember seeing one (?) in a campy install video but I can't find it. Seems like there should be on to keep the internal cables away from the spindle... Like this:
__________________
What about my dynamite? Last edited by Dr Luxurious; 02-19-2024 at 09:12 PM. |
#2
|
|||
|
|||
Yes, there is. It is somewhat confusingly named the EPS Bottom Bracket Cable Guide.
|
#3
|
||||
|
||||
Ah ha!
I wasn't including EPS in my searches. Thanks!
__________________
What about my dynamite? |
#4
|
|||
|
|||
As I recall one came with my Record 12 crankset.
__________________
Shad, Gunnar Roadie, Look 765 Optimum, Spesh Aethos |
#5
|
|||
|
|||
PM sent.
|
#6
|
||||
|
||||
I don't have one with my 11 speed Centaur crankset. I don't know what the purpose of having one would be. All the bearings are outside.
|
#7
|
|||
|
|||
While it isn't applicable to 11spd Centaur, the purpose is in the name. It is to prevent electronic shifting wires (and hydraulic hose) that are routed through the bottom bracket from rubbing against the spindle.
|
Thread Tools | |
Display Modes | |
|
|