Where to grab rubber grommets/plugs for those di2 holes in frames.

[bikerboy337]

Got a frame that takes DI2 or wireless and I’ve set up wireless. Now I’ve got the rear derailleur hole open for where the di2 cable would come out. Would like to plug it up with a rubber grommet/plug… no idea what those are called.

Is there an easy way to grab online anywhere? Don’t know what those things are called… just need 1 and a few spares to have on hand as 3 of my bikes all have the same setup…

Thanks in advance!

[quacker2000]

Usually those are frame manufacture specific. If you search your frame brand and the word "plug" or "blank" you might have some luck.

[PTinz]

I sourced some Cervelo plugs from Excel a while back when I went from Mechanical Red to ETap on a Cannondale SuperSix EVO frameset. Several different sizes available and was able to plug them all, they ran about $2 a plug.

[dr50470]

I was able to source “plugs/grommets from Amazon, they called them flush mount plugs.

[corkycalvin]

Give Litespeed a call, there’s around 5 plugs on my frame. Not sure if they fit your bike though

[notlance]

discussed here:-

https://forums.thepaceline.net/showt...ighlight=plugs