#1
|
|||
|
|||
'Modern'/Disc Bike Similar to Serotta Pronto
Every time I see a Pronto or Saratoga Race Ti pop up to the top in the galleries here, I start to dream. But as time goes on, standards evolve, and now discs are pretty much ubiquitous, wider tires are shown to be smoother and faster, etc. Plus those frames are few and far between given how short the window to get them was.
Has anyone found a newer, out of the box frame that fits what the Pronto stood for while being disc-equipped and handle up to 30c, maybe even 32, tires? Something built with racing front and center, but able to throw on a bit larger tire to smooth out the off-season miles...Or has someone had luck getting a custom built that seems to match up with that pretty well? Last edited by ikecycke; Yesterday at 09:45 PM. |
#2
|
|||
|
|||
Brad Bingham will build you a bike better than the Serotta Pronto. Seriously.
|
#3
|
|||
|
|||
He's definitely at the top of the list if custom comes into play. I could look at those welds all day long.
|
#4
|
|||
|
|||
I know I am going to sound like a shill for him. But it really is not (only) about the welds. I own two bikes made by him for me. Yes, the welds border on metallic pornography. But what he has a knack for is build you the bike that really rides the way you want. He has a knack for choosing the right tubes, his mitering is exquisite (perhaps one reason why the bikes ride so well), and his attention to detail throughout the entire bike building process is immaculate.
In my mind, getting the bike's geometry right is not that big of a deal. Where Brad sprinkles his magic is how the bike with the said geometry rides. |
#5
|
|||
|
|||
"Every time I see a Pronto or Saratoga Race Ti ..."
It seems like you should be taking a very good look at the bikes now built by those same people. No22. Here's their race bike that takes 30s no problem. |
#6
|
||||
|
||||
Quote:
I'm going to go to Bingham or Seven or Merlin to build me a Ti frame duplicating my current bike but with disc brakes and accommodate tires up to 32mm.
__________________
Call me Greg. |
Thread Tools | |
Display Modes | |
|
|