#61
|
|||
|
|||
Looking closer at the photos, I think you're right, the RH derailleur parallogram is slanted (but probably not as much as the Suntour). The Suntour also has an angle adjustment, which can raise and lower the cage to help adjust the chain gap. I would think that the RH derailleur could benefit if the frame had horizontal dropouts, to adjust the cassette position relative to the derailleur.
|
#62
|
|||
|
|||
Quote:
https://www.chapmancycles.com/wp-con...31196268_o.jpg Watching his videos of things he makes is incredible. |
#63
|
||||
|
||||
Is this the finished product? It looks prototype-ish. I'm no metalurgist, but the finished aluminum here looks both soft and rough to me. It looks as though it could use some anodizing and polishing.
__________________
♦️♠️ ♣️♥️ |
#64
|
||||
|
||||
it is just the straight off the machine CNC finish, it would be nice if it was polished
__________________
please don't take anything I say personally, I am an idiot. |
#65
|
||||
|
||||
cantilevers now, would consider a switch to compass / mafac raid style brakes.
__________________
please don't take anything I say personally, I am an idiot. |
#66
|
||||
|
||||
Quote:
__________________
please don't take anything I say personally, I am an idiot. |
#67
|
|||
|
|||
I wonder if the tab could house a short vertical slot, not unlike a FD braze-on. A bit of range for different cassettes.
|
#68
|
||||
|
||||
Quote:
The mount looks like it sort of sandwiches the derailleur between two plate that are perpendicular to the stay, you could braze them farther apart from each other and make some spacers to achieve some adjustment. I would probably just use it as suggested. 11-30 with a 30-44 on the front is plenty for me.
__________________
please don't take anything I say personally, I am an idiot. |
#69
|
|||
|
|||
never mind
Last edited by Waldo62; 12-14-2022 at 08:46 AM. |
#70
|
||||
|
||||
Quote:
__________________
please don't take anything I say personally, I am an idiot. |
#71
|
|||
|
|||
... and gone. At least listed as out of stock.
|
#72
|
||||
|
||||
Fig 1-3: Components, Bike, Antiquated communication devices not suitable for customer interaction
Prefers comments on Influencer/Ambassador IG and Blog Comments. |
#73
|
||||
|
||||
I want a "Town Bike" built up with one of these and a 3 speed freewheel. They should really make a black one.
|
#74
|
|||
|
|||
Bad luck. Guess it will have to be EPS, Di2, or AXS again.
|
#75
|
|||
|
|||
Pretty much
The tubeless lawsuit will fix some of that |
Thread Tools | |
Display Modes | |
|
|