Quote:
Originally Posted by Gibran
@velocipede is correct, here is what I did as a workaround. I removed the Ekar bearings from my cranks and installed “normal” Campy ones for my bottom bracket install. If you do that, any Campy bottom bracket will work with Ekar cranks. Below is a picture of an Ekar bearing and you can see the special seal it has on it that interfaces with the Ekar specific bottom bracket. Disclaimer - I live in California and don’t see a lot of mud so I’m not concerned about needing special seals. Although I’ve run normal Campy bearings for years in the wet and they do very well as long you service them.
|
Awesome info, I'll keep that in mind as an emergency option!
02-23-2021, 12:53 PM
Threaded Mode