Quote:
Originally Posted by cmg
if you take the hubs apart and knock off the corners of the the pawls (If your hub uses pawls) most hubs will quiet down. of course this will age the hubs and reduce the bearing surface of the face that makes contact with the freehub but it will quietier. you can't do this to a dt swiss hub for example, get use to the noise.
|
Pretty tough with ultegra or 105 hubs since the pawls are internal to the FH body..Yup, you can take 'em apart, then muck with the 2 pawls(poor idea, IMHO, ask Tyler Hamilton, when his wrench took one of the 3 pawls out and his farging wheel failed) and maybe get all the 1/8 bearing balls back in there, but.....
08-26-2014, 07:30 AM
Threaded Mode