Know the rules The Paceline Forum Builder's Spotlight


Go Back   The Paceline Forum > General Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 05-28-2024, 12:20 PM
trener1 trener1 is offline
Senior Member
 
Join Date: Dec 2010
Posts: 2,258
Way OT: Washer recommendations needed

My 19 year old washing machine seems to be on life support, so time for a new one.
Looking for a front loader that cleans well and will last for another 19 years.
We have young kids so it gets heavy use.
Anyone shop around lately? any recommendations?.

Last edited by trener1; 05-28-2024 at 12:22 PM.
Reply With Quote
  #2  
Old 05-28-2024, 12:58 PM
hypnos's Avatar
hypnos hypnos is offline
Senior Member
 
Join Date: Dec 2003
Location: Rochester, NY
Posts: 555
Speed Queen
Reply With Quote
  #3  
Old 05-28-2024, 01:29 PM
bigbill bigbill is offline
Senior Member
 
Join Date: Feb 2006
Location: Hackberry, AZ
Posts: 4,024
On life support how? Unless it's a circuit board issue, wear parts are replaceable. I have replaced the door seal and some belts on my 2007 Kenmore (IIRC Whirlpool) front loader and it's fine. None of the parts were expensive and I watched youtube videos for instructions.
Reply With Quote
  #4  
Old 05-28-2024, 01:29 PM
oldguy00 oldguy00 is offline
Senior Member
 
Join Date: Jun 2005
Location: Canada
Posts: 4,771
My advice, avoid the front load washers. Buy a classic style top load with the centre agitator.
Reply With Quote
  #5  
Old 05-28-2024, 01:32 PM
Wunder Wunder is offline
Senior Member
 
Join Date: Jun 2021
Posts: 458
I've been happy with LG front load washers. Work well and I've had no reliability issues.
Reply With Quote
  #6  
Old 09-20-2024, 02:52 PM
Ken Robb Ken Robb is offline
Senior Member
 
Join Date: Dec 2003
Location: La Jolla, Ca.
Posts: 16,188
Quote:
Originally Posted by Wunder View Post
I've been happy with LG front load washers. Work well and I've had no reliability issues.
We have had the same experience with LG front-loader.
Reply With Quote
  #7  
Old 05-28-2024, 01:34 PM
p nut p nut is offline
n - 1
 
Join Date: Oct 2013
Posts: 5,818
Quote:
Originally Posted by oldguy00 View Post
My advice, avoid the front load washers. Buy a classic style top load with the centre agitator.
Agreed on the top load. When I was shopping, I was also told to avoid front loaders.

On the agitator, I have found the unit we have without one cleans really well. On the plus side, you get more volume and no tangled mess (ie drawstrings getting tangled around the agitator).

Ours is an LG with WiFi. Been running great for 6 yrs.
Reply With Quote
  #8  
Old 05-28-2024, 01:40 PM
duff_duffy duff_duffy is offline
Senior Member
 
Join Date: Jan 2017
Location: southern NJ
Posts: 2,876
Plus one on skipping front loaders. Two family members have purchased front loaders on last 5 years and both keep the thing open all the time when not running to keep it from smelling like mildew. I don’t recall the details but both hate them.

Also, my 19 year old top loading washer I’ve gotten by with YouTube repair tutorials. I can’t set up hydraulic brakes but have had 100% success keeping my machine going for 19 years and under 100 in parts and just a screwdriver. Had to disconnect the lid shutoff safety switch but luckily nobody has tried to jump into it yet while running

Quote:
Originally Posted by oldguy00 View Post
My advice, avoid the front load washers. Buy a classic style top load with the centre agitator.
Reply With Quote
  #9  
Old 09-21-2024, 12:03 PM
robt57 robt57 is offline
NJ/NashV/PDX
 
Join Date: Nov 2012
Location: PDX
Posts: 8,888
Quote:
Originally Posted by oldguy00 View Post
My advice, avoid the front load washers. Buy a classic style top load with the centre agitator.
Just a few notes since we went no agitator washer, front loader in our case.

We use 1/2 as much detergent, the amount of lint in the dryer is much less, do that math yourself.

It self resolves unbalances. Guessing top loader can't do that as well if at all. It spins clump slow to top and shakes it loose dropping to bottom and reset cycle. First time it did that I was like "no way".

It also spins more moisture out than any other machine we've ever had. Sounds like a turbine, the spin RPMs are insane.

The dryer also has a water connection, it uses this for a few cycles of refreshing and wrinkle obliterating quite well. Our set are 5 year old Samsung FWIW. Back when you could get a set on sale for 1200.00 which is what we paid. Prices for machine with the 'extra' cycles are stupid money it seems like.
__________________
This foot tastes terrible!

Last edited by robt57; 09-21-2024 at 12:34 PM.
Reply With Quote
  #10  
Old 09-21-2024, 02:01 PM
cbass cbass is offline
Sebastian
 
Join Date: Apr 2013
Location: Maryland
Posts: 70
I have a LG front loader which has been rock-solid so far. I'd recommend opening the door and soap loader for a few hours after washing to keep that wet water smell down. There's also a a little water reservoir at the bottom of the washer which can be accessed through a small panel on the front. I usually empty that after every wash. Depending on the load size there can be a significant volume of water in there.
Reply With Quote
  #11  
Old 09-21-2024, 02:18 PM
Black Dog's Avatar
Black Dog Black Dog is offline
Riding Along
 
Join Date: Aug 2010
Location: Rockwood ON, Canada
Posts: 6,316
Quote:
Originally Posted by cbass View Post
I have a LG front loader which has been rock-solid so far. I'd recommend opening the door and soap loader for a few hours after washing to keep that wet water smell down. There's also a a little water reservoir at the bottom of the washer which can be accessed through a small panel on the front. I usually empty that after every wash. Depending on the load size there can be a significant volume of water in there.
That is the drain filter. It only needs to be emptied every once in a while
or so depending on how much washing you do. The point is to remove and clean the filter, not drain the water. The water in there is flushed out with every load you run. It is also recommended to run a cleanse cycle every 30 loads or so. A little bleach in the main compartment or dispenser (depending on the model) and 20 minutes later all done. This will keep any mold or mildew from forming.
__________________
Cheers...Daryl
Life is too important to be taken seriously
Reply With Quote
  #12  
Old 05-28-2024, 01:48 PM
dgauthier dgauthier is offline
Senior Member
 
Join Date: Dec 2003
Location: Los Angeles, CA
Posts: 1,582
If you want the new one to last 19+ years, there is only one.

Speed Queen: +1000.

You want the "old school" direct drive TC5 washer and matching dryer. Remember the washing machine your mother had decades ago that was built like a tank and worked perfectly for 30 years? The TC5 is that machine.

The TC5 is a top loader though. I suggest you go with it anyway. It's that good.

If you want to have some fun, there is a passionate (yes, passionate) Speed Queen fan base on the internet. Just Google around and you will find it. This YouTube video describes the fan base and the TC5 succinctly, starting at 2:10: https://www.youtube.com/watch?v=cRgbfxJ8MTQ

You won't find Speed Queen at the big box stores. You'll need to go to a "real" appliance store. This is exactly like going to a "real" bike store when you want a serious bike.

Last edited by dgauthier; 05-28-2024 at 02:40 PM.
Reply With Quote
  #13  
Old 05-28-2024, 01:55 PM
AngryScientist's Avatar
AngryScientist AngryScientist is offline
Administrator
 
Join Date: Mar 2010
Location: northeast NJ
Posts: 34,046
I feel like front loaders were/are some fashion trend. Everyone had to have one as if anyone ever looks at your washing machine.

I had one at the old house, it sucked. Had to keep the door seal cleaned and as mentioned, the door open all the time.

It's a ridiculous concept really; why on earth build a machine where you need a submarine door to keep the water inside under normal operation where a top loader uses the beauty of gravity to simplify the whole process.

Anyway, a two decade old top loader came with the new house, and it's better in every way than our former "modern" front loader ever was.

If this one dies, I will go for a top loader without the agitator center beam, but will never go back to a front loader.
Reply With Quote
  #14  
Old 05-28-2024, 02:00 PM
rwsaunders's Avatar
rwsaunders rwsaunders is offline
Everything is connected
 
Join Date: Nov 2005
Location: Seaburgh
Posts: 11,352
Another vote for Speed Queen.
Reply With Quote
  #15  
Old 05-28-2024, 02:45 PM
einreb einreb is offline
Senior Member
 
Join Date: Jul 2012
Location: Chicago Burbs
Posts: 115
Quote:
Originally Posted by rwsaunders View Post
Another vote for Speed Queen.
and another
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.