|
#1
|
|||
|
|||
Favorite vertical storage solution for apartment?
I'm looking for the simplest, least obtrusive and least harmful (to the bike and wall) way of vertically storing my bike in this corner of my apartment (pic below).
Any tips, tricks, pointers? Thanks! |
#2
|
|||
|
|||
I have my three bikes mounted with clug fasteners. They're fabulous.
[QUOTE=toosahn;1800269]I'm looking for the simplest, least obtrusive and least harmful (to the bike and wall) way of vertically storing my bike in this corner of my apartment (pic below). Any tips, tricks, pointers? Thanks! |
#3
|
|||
|
|||
Quote:
Edit: Nvm, found 'em! |
#4
|
|||
|
|||
Easiest and cheapest way is to find a stud and screw a hook into the wall. You're going to have to patch/paint the hole anyways. So who cares about the tire scuffs; a poster can save a little elbow grease, I guess.
If you want to avoid wall changes you're building something free standing or maybe considering the ceiling which is harder to patch/paint, but not by much. There are lots of freestanding racks out there, but I don't know of one that holds the bike up by the front tire. You could take a 2x6 that is the height of your vertical bike and build some kind of weighted triangular base. Sorta like a driveway basketball hoop... Have fun! |
#5
|
|||
|
|||
Quote:
http://t.harborfreight.com/mobile-bi...age-61231.html I use that for the kids' bikes and it's worked well (and lasted longer than the usual "use once" for Harbor Freight tools ) |
#6
|
||||
|
||||
#7
|
|||
|
|||
1x4 into studs, basic hook from a hardware store into the 1x4! most hardware stores sell some huge hooks for bikes, but smaller ones work just as well (or better).
if you want it to look good, you can cut some bevels into the 1x4, and stain it... and then put another one on the wall where your rear wheel touches the wall. that will protect the paint. |
#8
|
|||
|
|||
I use one of the freestanding racks from Performance. Got it years ago, still keeps trucking along. Can fit four bikes on both sides.
Great way to hang tires and all the rest. |
#9
|
|||
|
|||
I built this but scaled up to fit 6 bikes, for about $60 in wood (new). almost 3 years old not and the only issue is mixing road bike handlebars with MTB and commuter bike handlebars in a tight space. Some forethought could have prevented that but still a decent solution for storage in my 850 sq ft house.
DIY Vertical Rack |
#10
|
||||
|
||||
Want to add a +1 for the Clug, in addition to a tray for the rear tire. My friend even 3D printed one, it's such a simple design.
|
#11
|
||||
|
||||
Quote:
I like the idea of these a lot but not so keen that they rely on tire pressure to hold the bike. One bike daily rider would be fine since easier to stay on top of keeping tire pumped up. A few bikes? Nope |
#12
|
|||
|
|||
i use two of these in my place, but did not attach the extra rod and hooks (wanted to keep the look simple). i have had people comment it looked nice.
http://www.topeak.com/products/stora...neupbikeholder |
#13
|
|||
|
|||
TwoUp Tune Up Stand
If you can't mount anything in the apartment, I suggest: http://www.topeak.com/products/stora...uneupbikestand
Stable and strong for the past 3 years |
#14
|
||||
|
||||
#15
|
|||
|
|||
...I am really impressed that you managed to get the handlebars/front wheel perfectly straight. Mine always swing towards the wall when I mount it on the same rack.
|
Tags |
bike storage |
Thread Tools | |
Display Modes | |
|
|