|
|
|
|
#1
08-08-2020, 01:59 AM
|
||||
|
||||
|
RD + Roadlink + replaceable hanger = too much flex?
Has anyone experience the following?
My Parlee uses replaceable hanger and I added the Roadlink to allow a larger cassette with my DA RD-7800. Despite that I adjusted the shifting accurately at home, the shifting goes completely off as soon as I am out of the saddle. I can't find anything wrong and can only assume there are too much flex from the series of three items at the rear dropout. BTW, both the hanger and Roadlink are made from aluminum and it was problem free with the same RD and the hanger before adding the Roadlink. Any opinion or experience is most welcome. Thanks in advance.
__________________
鐵翼蔽空 馬達齊鳴 Last edited by biker.caliente; 08-08-2020 at 03:25 AM. 
|
|
#2
08-08-2020, 07:12 AM
|
|||
|
|||
|
Works fine on my Parlee with an XTR 11-40 cassette and Ultegra 6800 series Di2 RD.
Not sure what you have going on or why it would be worse seated vs. standing. Worn out chain + new cassette maybe?
|
 |
|
|
Linear Mode
