Ugh! Campy!

[ColonelJLloyd]

Originally Posted by EB

Say what you will about the tenets of Campagnolo…

Props

[sw3759]

This might work….

https://www.condorcycles.com/en-us/p...44762174226753

Originally Posted by kgbianchi

I am building a new Time ADHX 45 with Campagnolo Super record 12 speed mechanical that requires shift housing from the shifter to the bottom bracket where the stops are located. This thread seems to point to using Jagwire housing when longer housing is needed.

Can anyone comment on long term experience with running Campagnolo 12 speed with longer housing?

Or, are there any sources for longer Campagnolo Maximum smoothness Shift housing?

[herb5998]

If you have a local dealer, they should be able to source Max Smoothness housing by the foot from Campagnolo NA.

[vespasianus]

Originally Posted by kgbianchi

I am building a new Time ADHX 45 with Campagnolo Super record 12 speed mechanical that requires shift housing from the shifter to the bottom bracket where the stops are located. This thread seems to point to using Jagwire housing when longer housing is needed.

Can anyone comment on long term experience with running Campagnolo 12 speed with longer housing?

Or, are there any sources for longer Campagnolo Maximum smoothness Shift housing?

I think it should be fine.


I have bought this:

https://www.condorcycles.com/en-us/p...44762174193985

By the meter - it is $11.

[lafish]

They appear to be sold out at the moment, but I've had good luck with these folks: https://nonstopciclismo.com/collections/cables-housing

[C40_guy]

Originally Posted by Dr Luxurious

Finally building up my new bike after a car hit me.
Got Campy 12 Disc.
Campy doesn't supply enough of the ridiculously expensive Max Smoothness housing to do full internal cable runs.
Plus, no caliper mounting bolts.
I mean, COME ON

It's Campy. Love it or go Shimano.

I'm about to do a similar build on a Psychlo X disc...but without internal runs <whew>

That having been said...how do I figure out what caliper bolts I'll need?