The 'Un-Official' Campagnolo Ekar thread

[vespasianus]

Originally Posted by perdido

No luck. Shifting is somewhat improved but still subpar. It hesitates at some point both going up and down the cassette.

I did install a new cable and liner from Jagwire (Road Elite sealed) and did check hanger alignment once again.

Last bullet is Max Smoothness cable set, but can't bring myself to pay that absurd amount of money (100 coins), especially when only 1/2 of the set is needed.

Very odd, what gears is it hesitating in? The same issue with the last two largest cogs? Can you shown any pics or video of the setup.

Also, for cables, I use this for my campag bikes:

https://www.condorcycles.com/en-us/p...31645441851530

[nalax]

Campy also recommends cable ends with a nose for the shift cable. I've tried both types and the long ones work better.

[vespasianus]

Originally Posted by nalax

Campy also recommends cable ends with a nose for the shift cable. I've tried both types and the long ones work better.

And no cable end ferrule where the outer cable fits into the shifter body. Will take some pictures of my cable routing.