Quote:
Originally Posted by 12snap
I've been using adapters to run a non-Boost wheelset in a Boost frame and fork for 4 years now. It works fine but the chainline will be off since the cassette is 3 mm inboard of recommended. I haven't had any issues but it will wear out your drivetrain faster. It's also kind of a pain getting the spacers lined up on the axle when you put the wheel back on after a tire change. I cracked one of my rims so I'm using it as an excuse to finally get a Boost wheelset. If it weren't for that I'd still run the adapters.
|
Thanks, yep the problems solver adapter use one 6mm shim and states you need to re-dish the wheel. I think I'm going to try one of the adaptors with two 3mm spacers and see how that goes. Thanks again