Quote:
Originally Posted by zap
The levers appear to be a little low. Use a straight edge that's lined up with the bottom of the bar end. The bottom of the brake lever should be a few mm above the straight edge. If you have the right bend bar, the tops of the hoods should be flat or rising slightly back to front.....better for your wrists.
|
Quote:
Originally Posted by David Kirk
I agree with Mr. Zap - the levers are too low on the bars. I'd put a straight edge on the bottom of the bar and set the lower tip of the lever 5-10 mm above that.
|
This is hilarious because I just recently moved the shifters up the bar a little bit. But I'm game to move them up even more.
I know this is all very personal, but something tells me I've had them wrong for me for quite a while now.