just a quick update to this thread with the actual specs of the o-rings.
i found this on another forum:
I noticed that the o-rings on my 4 year old speedplay X5's were cracking and looked like they were ready to fall off. I took the pedals apart and cleaned and regreased everything, and after getting no reply from emailing Speedplay, I matched them up at my local Lowes in the faucet repair section. I used #6 - 7/16 OD x 5/16 ID x 1/16, and they fit perfectly!
Quote:
Originally Posted by DKM
i rebuilt my speedplays (road and mtn) and i used a set of calipers to measure the o-rings and c clips....i bought them from GRAINGER for like .10 each. They work perfectly. no big deal. I also bought the bearings through GRAINGER for 1.00 or 2.00 each.
hate to say it...SP is a ripoff. 37.00 for their kit that costs 5.00-10.00 per pedal to the average joe. It took me all of 25 minutes per set to rebuild them. I rebuilt all my pedals, (3 X-2 roads and 3 frogs) in like 3hrs. The more i did, the easier it got.
if you want help...PM me.
|