Found the culprit!
Hi OP,
You had me getting concerned. I just checked it was 9-speed. I was at a loss as to what type/model of derailleur the shop installed and still am.
I made a list of recommended checks and it turned out that Scott's suggestion solved the concern. I turned up the cable tension on the derailleur and the skipping stopped and all nine speed are back in service!
I do appreciate all the thoughts and suggestions. Thank you all.
I have an 11-speed Shimano group set on order that will go on the Hilsen but wanted to fix the problem as I will donate the 9-speed system to the local bike co-op as everything is in very good condition. Including the rear derailleur!
Again, I appreciate the help very much.
Patrick
|