|
The reason why I ask is that I always damage the flat area by the thread at the end of the pedal if I used the 15mm pedal wrench. Using a hex bit and work from the other side of the pedal would be more precise, if I know roughly how tight it should be torqued down. 35-55 NM seems to be appropriate as this is what Shimano listed for their pedals. Just want to be a bit more accurate.
__________________
鐵翼蔽空 馬達齊鳴
Last edited by biker.caliente; 11-26-2021 at 06:54 PM.
|