Thread: 10 speed chains
View Single Post
  #6  
Old 03-27-2008, 07:40 AM
Dave Dave is offline
Senior Member
 
Join Date: Nov 2004
Location: Loveland, CO
Posts: 5,898
As already noted, just about every current brand of 10 spoeed chain is now 5.9mm wide, so there is no width issue.

There is no reason a Campy UN chain won't work as well and although it may cost a little more, it will elongate at about 1/4 the rate of a Shimano chain, so it should last longer. With a well maintained Campy chain, elongation ( measured with a ruler) won't tell you when to change the chain. Roller and side wear rates are much larger. I alternate three chains at 2500 mile intervals (maximum), when my chains are about half worn. Each gets a second rotation and is trashed when the distance between the rollers gets into the .235-.240 range.

The KMC DX10XC chain seems to shift nicely and has a quick-link. I don't have any wear data yet, but I'm working on it. Performance has this chain on sale for $20-23. Might be the best deal out there. If I was paying $40 or more, I'd get a Campy UN.
Reply With Quote