Quote:
Originally Posted by ikecycke
Just confirming what has already been said above. The Di2 will most likely need to be partially external, at least for the junction box as there really isn't a place to slide an internal one into the frame.
|
I put the B junction box in the seat post. The trick was put the wire in BB shell (you will have to very very slightly drill out the drain hole. Then run the wire up and out of the seat post. Wire it outside of the seat post and drop it in. Plus I had to run the FD wire around and up.
[IMG]
IMG_1420 by
Jon Mandel, on Flickr[/IMG]
[IMG]
IMG_1418 by
Jon Mandel, on Flickr[/IMG]
Full pictures and directions in a similar thread across the hall.