Quote:
Originally Posted by gemship
No worries, when you feel the tap doesn't want to go further just back off and clean it with a rag certainly no forcing it. (I always used compressed air and blow it off, my days in the machine shop) eventually you'll chase the galling out. Good luck and keep us posted!
|
Bought a new tap, fresh bottle of cutting oil..ran the tap, actually went thru from both sides pretty easy..bolted RD to frame and.........same thing along with some really colorful sparks. So...swapped for a steel bolt. And all seems ok..still not sure *** is going on..I'm gonna blame it on Ben.
Doohhh!!