View Single Post
  #6  
Old 04-06-2013, 02:56 PM
SPOKE SPOKE is offline
Hey, watch this!!!!!
 
Join Date: Dec 2003
Location: Raleigh, NC
Posts: 1,438
Carefully run your derailleur hanger tap thru the threads. I bet there is a little buildup in the root of he threads. Be sure to use cutting oil with the tap.
There is a posibality that threads in the hanger have been "pulled" a little by tightening the derailleur bolt a bit too much so now the pitch diameter of the threads are not quite to spec.
__________________
SPOKE
Life's too short to ride cheap bikes!
Reply With Quote