Quote:
Originally Posted by bigbill
I bought a Uyecove torque wrench and sockets from Amazon. It was about $60. It is 200 inch-pound/22.6 Nm, and I could dial in 3 Nm easily with the right reading glasses. After I got the torque wrench, I backed off every fastener on the bike and torqued it according to SRAM or Ritchey. The Ritchey one bolt and the FD mounting bolt actually take much more torque than I would have applied without a torque wrench. I swapped out the Red 33/46 for a 35/48 powermeter, and the torque wrench was handy for all the small fasteners.
Since I retorqued all the fasteners a year ago, I only hear the tires scrubbing on the pavement and the occasional rub of a disc because SRAM discs are inferior to Shimano, IMO.
|
Thanks. I have been using the effeto mariposa that starts a 2nm.