View Single Post
  #1  
Old 02-07-2024, 07:13 PM
Mr.Appa Mr.Appa is offline
Member
 
Join Date: Aug 2023
Posts: 59
2020+ Ritchey Road logic Tire Clearance

Heyo,

First post here so apologies if I goof something up. I acquired a used Ritchey Road Logic (Rim Brake version) recently and was unable to find some good photos/confirmation of actual measured tire clearance with certain brake types so I took it upon myself to get a few photos and take some measurements to help folks in future searches of tire clearance for this frame using the last generation of Shimano rim brakes (R9100, R8000, R7000).

I mounted some 33mm measured tires (34c on 19mm ID rims) under some R9100 brakes and that's about as close as I'd go (about 2-3mm between the pivot and the outside of the tire laterally), the frame has enough clearance, but the brake itself is the limiting factor in the out-of-plane direction. The vertical clearance was more than adequate and if the brake bridge/fork mount was raised another 5mm there would still be enough reach on the brakes AND enough clearance to probably run a 35mm measured tire. Maybe a future effort...

Anywho, just trying to contribute!
Attached Images
File Type: jpg Front.jpg (67.0 KB, 565 views)
File Type: jpg rear_mod.jpg (58.8 KB, 555 views)
Reply With Quote