|
Brian, thank you for the info, the dkg link on the seat clamp, and offering to look at it. The frame, I believe, is around an '03-04 custom legend, its a bigger frame with a 63cm seat tube. The 29.5 clamp dkg offers should fit pretty close based on my measurement.
As for reaming the seat tube, would a helical reamer specific to 27.2 be best or will an adjustable reamer work as well/better/worse? Is this something that is best left to a machine shop or would hand tools and lots of cutting fluid suffice? I've reamed several steel and aluminum bikes using an adjustable type hand reamer, but ti is generally harder on tooling.
I'll try to post a picture of where the tube is misshaped, so you can see what I am talking about with that issue.
|