Source for curved washer for campagnolo downtube shifter
 

Anyone know if the curved washer for campy downtubes have changed design since the 80s/90s?

Here’s the scoop—finally got some Paul thumbies in campagnolo—and went to reach for my 10 sp bar ends and realized I lost a bolt and a washer.

eBay search comes up with 0 10 sp bar ends but plenty of c record.

I don’t want to pay $25 and be wrong so just wondering if anyone knows off hand.

https://www.picclickimg.com/d/l400/p...ear-Levers.jpg

I actually don’t need the bolt just the curved washer under it.

https://rover.ebay.com/rover/0/0/0?m...2F173842750590

Similar c record

Those look a bit different to me, but I bet that Old Potato can confirm.

Regardless, I'm pretty sure that I have a set of these in a can of random bike junk. I can check tonight and mail them out to you if so.

Texbike

That would be awesome. It looks like I actually will need the threaded bolt and the washer and possibly one other small washer. The upper most washer in the ebay ad linked above

You're talking about the one that's stamped "Campagnolo Made in Italy"? Right or left shifter? I would hazard a guess that it's different on the bar end shifters from the ones linked on eBay, but I don't have catalogs that show numbers for small parts prior to 1992. I have a bunch of loose DT shifter bits here somewhere. Should also have a pair of C10 bar end shifters and the linked DT shifters, which I think are retrofriction ones.

RH or LH? RH one, for the indexing shifters is the same from 1993, last gen of DT shifter thru the 10s barends..SL-RE-011..same for Veloce shifters also.

BUT NOT the same as pictured in ebay friction shifters. The LH one IS the same as friction shifters..SL-RE-013.

The bolt for the RH shifter is also different than the LH one and the friction shifters..longer..SL-RE-012 RH one, SL-RE-013 LH one and RH one also for friction shifters..

Try here:

https://www.merciancycles.co.uk/prod...n-tube-levers/

That's hot.

OK, this is what was in my parts can. A little rough looking, but you're welcome to any of them if you think they'll work.

Texbike

I need the right hand. The indexing side for the rear. Can anyone chime in and confirm what texbike has will work?

I’m thinking they won’t and I need something more like this
https://rover.ebay.com/rover/0/0/0?m...2F283662091547

I'm happy to just send them to you to test out if you like. If they work, great. If not, just send them back.

Cheers,

Texbike

I think the parts Tex has are all friction era stuff, which are about 7 mm smaller in diameter than what you lost. I think they will work though. I dug a similar bolt and washer out and tried it on the bar end shifter. It works if you don't mind the look. As Peter mentioned, the RH bolt is quite a bit longer but the shorter ones will catch enough thread to hold it together.

Thank you for checking.

Aesthetics are always important but functionality is paramount. I’ll use the texbike parts as a stop gap and find the real deal when someone has a destroyed shifter they’re throwing away

Trying to message you back. Mailbox is full

Apologies! Fixed.

Sorry, of the pictured stuff, none is proper for the RH, indexing, shifter. The other stuff will work but......