The Paceline Forum

The Paceline Forum (https://forums.thepaceline.net/index.php)
-   Catalogs (https://forums.thepaceline.net/forumdisplay.php?f=18)
-   -   2011 Serotta Ready Custom Geometry (https://forums.thepaceline.net/showthread.php?t=178972)

paredown 12-15-2015 06:38 AM

2011 Serotta Ready Custom Geometry
 
1 Attachment(s)
In the interests of completeness, I thought I would put this up before it disappears off the various former dealers' websites:

Plum Hill 04-10-2019 09:51 PM

I’m curious if anyone with a 2011 has compared their frame to this chart.
I have two HSGs, one carbon and one steel, both 57 Performance geometry (177mm head tubes).
The chart has Reach of 36.3 and Stack of 63.7.
I measured the carbon and it’s Reach is 38 +- a few millimeters and the Stack is 60.3 mm. The steel varies a few millimeters but it had S&S couplers installed.
How could they put out a chart that’s off by this much?

Dave 05-16-2019 05:27 PM

You really think that you can take reach and stack measurements at home to a few millimeters accuracy?

Even if you could, a few millimeters is trivial.

Road Fan 05-17-2019 06:55 PM

Quote:

Originally Posted by Dave (Post 2541612)
You really think that you can take reach and stack measurements at home to a few millimeters accuracy?

Even if you could, a few millimeters is trivial.

Out of curiousity, why can't readers here take good stack and reach measurements, within, maybe +/- 3 mm? Why would the room in which I measure make any difference?

Plum Hill 05-23-2019 12:53 PM

Quote:

Originally Posted by Dave (Post 2541612)
You really think that you can take reach and stack measurements at home to a few millimeters accuracy?

Even if you could, a few millimeters is trivial.

Yes. A steel straightedge and my normal place of measure - on the nuts.
A few millimeters is trivial. A couple of centimeters aren’t.


All times are GMT -5. The time now is 06:47 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.