The Paceline Forum

The Paceline Forum (
-   Vendors (
-   -   New Vendor in town-Chisholm's Custom Wheels (

oldpotatoe 03-04-2015 06:07 PM

New Vendor in town-Chisholm's Custom Wheels
Sold my shop(Vecchio's) about 15 months ago. Of the 'bike biz', I miss the 'biz' not at all but I miss the 'bike' a lot.

Learned to build wheels in 1985. Mike Howard in Colley Ave bike shop. Something I really enjoy. Built something north of 4500 wheels.

Look for an AD of sorts in classifieds.

Hubs by DT, Campagnolo, Shimano, Miche
Rims by DT, H+Son, Velocity, Mavic(CXP-33)
Sapim spokes

Most are ala cart. No real packages but

"Conventional Wheels built Exceptionality Well"

Email, let me know what you are looking for and we'll grok.

If you want to send me hubs and rims, for me to build, that's ok too.

Thanks Peter Chisholm

Rebel_Biker 03-04-2015 06:39 PM

Great to hear. Good luck with the new venture. I am sure you build some incredible wheels and I would not hesitate to send you business.

majorpat 03-07-2015 09:01 AM

Great to see this, I have some wheels built by Peter and they are perfecto. He knows what he's doing.

bluesea 03-10-2015 12:18 PM

Good to see you keeping your hand in there. Like the initials of your company.

merckx 03-11-2015 09:30 AM

The world needs more gentlemen like Peter, but not more than the bicycle world.

jmoore 04-16-2015 09:15 PM

I've got rim and hubs and I need a wheelbuilder!

oldpotatoe 04-22-2015 09:42 AM


Originally Posted by jmoore (Post 1742427)
I've got rim and hubs and I need a wheelbuilder!

Send them to me address below.

Peter Chisholm
2744Northbrook Place
Boulder, CO

PM sent

jmoore 05-25-2015 08:42 AM


The wheels Peter built me are perfect. I rode them yesterday in the rain and they performed flawlessly. A definite upgrade over and exactly what I wanted.

Peter was also less expensive than my LBS and the turnaround time was super quick. Highly recommended.

Thanks Peter!

Wolfman 03-24-2016 12:09 AM

1 Attachment(s)
Wheels. OP put together some winners for me. 32h Record to DTSwiss 440s. 3 cross front and rear, natch.

I had the hubs, he supplied the rest and they are light and tight. Great communication, quick turn around, good choice of shippers (Bikeflights).

Would recommend.

VoyTirando 03-08-2017 04:25 PM

Wheels from a master
After gathering advice and opinions here and elsewhere re: upgrading from my venerable but narrow and heavy Campy 9/Open Pros, I took the plunge. I wanted a strong, wider wheel to use on- and off-road, for my S+S do-it-all bike. Man o man am I thankful I was steered to Old Potatoe.

El Viejo Patata built me an absolutely killer set of wheels off a pair of Tune Mag hubs I sent him: he first serviced the (very dry) hubs, then advised me on rim choice (thank you! I would've chosen wrong), and we ended up going with H Plus Son Archetypes laced 2x up front, 3x in back. Turnaround from sending the hubs to him, to the wheels arriving on my office's doorstep was about 10 days total. They're incredible to behold. More importantly, they are the truest wheels I've ever mounted up. My brake shoes have never been set so close to the rim. And geez Louise do the perform. Climbing, sprinting, and just flat out spinning is noticably .... different. Wow.

Makuman 05-21-2017 08:34 PM

Probably a dumb question but are you able to build 650b wheel sets?

Catella 11-24-2018 07:21 PM

Excellent! If I have a need will be sure to contact you. Thanks

All times are GMT -5. The time now is 05:39 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.