6800 Front Derailleur Shifting
For the life of me I cannot get my Shimano 6800 derailleur to shift nicely on my Ind Fab Ti frame. I have tried both set-up options and I just don't seem to get enough movement top to bottom. I can shift ok but am constantly rubbing and have to trim excessively (in my opinion) to keep things quiet. The the derailleur clamp, chain and chainrings have all been changed to no avail.
I have the same derailleur on two other bikes so I believe there is something about this frame and the 6800 derailleur that do not play nice. Are there any tricks that might get a better result? I also read that the new 8000 series front derailleur is a new design and might work better. Can anyone confirm. Thanks. |
Quote:
|
Quote:
M |
Great. I tired of messing with this one.
|
Quote:
M |
Read and follow the Shimano tech doc exactly. Make sure you set the tension with the shifter in the correct trim position. It's not like most FDs. A forth hand helps with the initial tensioning too. The new design gives better tire clearance but is finicky in its own way. But the tension microadjust really helps.
|
I can't help but wonder what would be posted if this was a post about a SRAM front derailleur....
My apologies to the OP. But Shimano front derailleur shifting sucks. Bad. |
Quote:
|
Two thoughts:
1) Some frames are more difficult than others to set up 9000/6800/5800 front derailleurs. Seems to be a function of chainstay length and chainline. I have a CAAD10 that set up quickly and easily with a 9000 front derailleur. My CAAD9 with 6800 nearly drove me to drink. 2) Check out this YouTube video for an easy workaround: https://youtu.be/-5jnNScKhRs Greg |
I think I have tried all the tricks and need to try the new 8000 derailleur. It seems like Shimano cut the tolerances alittle to fine with the 6800 front shifting. I will admit that shifting performance is excellent ie super quick but I wish I had more overall room for the front rings. I am right at zero on both the high and low position and I hate having to trim all the time. As I said, my other bikes shift much better so I think my IF frame is a problem.
|
I had the same troubles with the 6800 FD on my Vamoots. I tried all the tricks, watched all the videos and finally gave up after a year or so. Bought the 8000 FD last fall and problem solved. I concluded there was something about my frame that was just not completely compatible with the 6800, as I’ve set up the 6800 with no issues at all on other bikes.
|
All times are GMT -5. The time now is 08:05 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.