Pocketable Mini Pump?
 

I recently got a new bike, and my frame pump didn't fit (it's currently on its way to a fellow PL member). I'm debating whether to get another (correctly-sized) frame pump or something small enough to fit in a jersey pocket. I've used Lezyne mini pumps in the past with good results, but I'm wondering if there is anything else out there that is small and works well.

Anybody got some good recommendations for small pumps that don't need to be attached to the frame?

Done and done:
https://static.biketiresdirect.com/p...0/lhtdc6-1.jpg

I haven't found anything better made, especially for the money, than Lezyne. I usually just carry the Small sized HV pump (not HP).

I would get another frame pump. Lezyne masterblaster, $30 and its one of the best frame pumps. If you use it once a year it is worth over a mini pump (imo of course)

Topeak Race Rocket. I have one and it's a winner. It will pump up a tire to full pressure, though it does take a while because it's small. But it's not poorly made. It threads onto a valve with a small hose, making a good seal to the inner tube valve stem. And it fits into a jersey pocket easily.

I have the Lezyne Pressure Drive and it's a good pocket size, has the flexible hose and seems built well.

I was always curious about the Silca Pocket Impero, though it's pricey... But most of their stuff is top notch.

I have one and carry it often. Haven't had to use it much, though. It does the job, but I've found it finicky enough that I'm moving to a full size frame pump (Zefal HPx). Biggest problem seems to be the sealing of the chuck on the valve stem. Lots of wasted effort in air leakage. Maybe it's just me, though. The pump itself is made very well, and will likely serve my grandchildren...

Previously I'd used the Blackburn Airstick, and went through several of those. They would eventually fail either in corrosion of the internal valves, or in the case of the last one, just seize up the insides. The dual action was nice in getting tires up to pressure quickly, though.

Ding, ding, ding!

My frame pump was the big Impero, and it worked great when I needed it to. I like Silca stuff, and the couple of times I've needed customer service, they've been awesome to deal with. I'm just considering not spending a ****load of money on another pump that probably won't get used much; however, that's not the kind of attitude we like to see around here :no:

https://ipump.co.jp/store/ipump-micro/

Can’t get any smaller than this one. I got one when they where on Kickstarter. It does work though you need many strokes to get tube up to presssure.

Unless riding solo in the boonies I've gone to a chuck and a couple of CO2 cartridges.

Used to carry a Genuine Innovations combo CO2 Inflator/pump, which actually worked well for being 7in long. Clamps onto a presta and stays there while pumping - or screw a CO2 on and use it as an inflator. CO2 cart attached to opposite end makes a good pump handle (as pictured). Not a precision tool, but is 10-11 years old and still works like new. Light, easy to pocket/snap in cage bracket, and reliable enough for emergency backup. When carrying just a couple of CO2's seems "risky" I will take this along - I know it and a patch kit will get me out of a jamb in the middle of nowhere. That said, if your reality is that you puncture frequently and ride in the middle of nowhere, you might want something more substantial.

http://pelotonmagazine.com/wp-conten...ro_Peloton.jpg


Think they're out of production now but no doubt someone still makes something similar.

When these Unich first came out, there was a guy on another site offering something like a 50% discount. I’ve had it over a year now and like it so much that when I want to lighten the tool burden for a short ride, I leave the CO2 behind. Fits into a jersey pocket with about a cm sticking out. I can pump a 23 or 25 c tire to about 90 psi without too much of a workout.

BTW, I’ve had enough rides with flats > CO2 supply that I carry a pump now.

https://www.amazon.com/DUAL-HP-S-OR-.../dp/B00EC0CWAU

+ a bunch on this

I have this as well, and I will say that the hose is a big +. If you don't have that flexible joint, you can break the seal on a tubeless valve pretty easy if you're not careful.

What high volume (low pressure) mini-pumps are preferred to minimize strokes?

My new bike with rack, bottle cage and disc housing braze-ons everywhere has no place for frame pump.