The Paceline Forum

The Paceline Forum (https://forums.thepaceline.net/index.php)
-   General Discussion (https://forums.thepaceline.net/forumdisplay.php?f=3)
-   -   Recommend a frame painter for my speedvagen (https://forums.thepaceline.net/showthread.php?t=292144)

thegunner 02-02-2023 12:24 PM

Recommend a frame painter for my speedvagen
 
i did a dumb, and i left my speedvagen on the trainer during my #dadwatts phase -- there's a bit of surface rust and i'd like to take advantage of this to get it repainted.

Who are the go to painters now?

black magic and hot tubes are the two i know of off the top of my head.

deluz 02-02-2023 12:31 PM

Joe Bell is always another one highly recommended.
Located here in San Diego.

FriarQuade 02-02-2023 12:34 PM

Does Speedvagen not repaint their own frames? The other people mentioned definitely do quality work but I'm curious, why not go back to the source.

Blown Reek 02-02-2023 01:12 PM

Oliver Cleveland at Dark Matter Finishing is as good as you can get.

AngryScientist 02-02-2023 01:15 PM

Does SV do their own paint in house?

Velocolour is another A+ option.

72gmc 02-02-2023 01:16 PM

I’ve heard good things about Now You’re Finished

https://www.nyfpaint.com/

pdonk 02-02-2023 01:18 PM

If it is minor frame corrosion in a few spots, velocolor can do touchups. They fixed a few on my SV and you can't even tell.

If you call Richard at SV and ask for touch up paint, it will beeven better as the matching will be pretty much dead on.

icepick_trotsky 02-02-2023 01:18 PM

New shop here in my neck of the woods doing some cool stuff:

https://www.twcarbon.com/custom-bicycle-paint

Blown Reek 02-02-2023 01:30 PM

Quote:

Originally Posted by 72gmc (Post 3207845)
I’ve heard good things about Now You’re Finished

https://www.nyfpaint.com/

Adam Blumenthal is also as good as you can get, too.

thegunner 02-02-2023 01:33 PM

Quote:

Originally Posted by AngryScientist (Post 3207841)
Does SV do their own paint in house?

Velocolour is another A+ option.

they do, but this is a 2015 frame that's been raced -- the cost to get the hollafade that i currently have has also gone up significantly. i'm inclined to just do something a bit different given the frame's age.

Ken Robb 02-02-2023 01:37 PM

Where do you live? Shipping is expensive and a PITA.

deluz 02-02-2023 01:40 PM

Quote:

Originally Posted by Ken Robb (Post 3207860)
Where do you live? Shipping is expensive and a PITA.

Frame can also get damaged in shipping, ask me how I know.
Better to go local and drive it there if possible.

shoota 02-02-2023 02:04 PM

Quote:

Originally Posted by Blown Reek (Post 3207840)
Oliver Cleveland at Dark Matter Finishing is as good as you can get.

Pretty sure Oli is powercoat only. In case OP was looking for paint.

prototoast 02-02-2023 02:06 PM

Quote:

Originally Posted by shoota (Post 3207880)
Pretty sure Oli is powercoat only. In case OP was looking for paint.

http://www.darkmatterfinishing.com/services

shoota 02-02-2023 02:07 PM

Quote:

Originally Posted by prototoast (Post 3207881)

Ope, my b. Thought he was only doing powder.


All times are GMT -5. The time now is 08:51 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.