The Paceline Forum

The Paceline Forum (https://forums.thepaceline.net/index.php)
-   General Discussion (https://forums.thepaceline.net/forumdisplay.php?f=3)
-   -   Quick release skewer/Thru axel (https://forums.thepaceline.net/showthread.php?t=258791)

cookietom 09-24-2020 01:30 PM

Quick release skewer/Thru axel
 
How to change from thru axel to quick release skewer?

jtakeda 09-24-2020 01:55 PM

somethin like this
https://www.nashbar.com/problem-solv...a-12mm/p664126

If youre talking about the rear, you cant without having a hub where you can swap out the end caps

cookietom 09-24-2020 03:02 PM

Quote:

Originally Posted by jtakeda (Post 2800690)
somethin like this
https://www.nashbar.com/problem-solv...a-12mm/p664126

If youre talking about the rear, you cant without having a hub where you can swap out the end caps

Thanks, it is for front hub. Rear already have quick release. I need 20mm not 12mm.

jtakeda 09-24-2020 03:26 PM

Quote:

Originally Posted by cookietom (Post 2800730)
Thanks, it is for front hub. Rear already have quick release. I need 20mm not 12mm.

From my understanding a 20mm thru axle is based on a longer axle standard (longer than 100mm) so the answer is entirely hub dependent and is based on whether your hub manufacturer has an adapter available

ColonelJLloyd 09-24-2020 08:57 PM

Yes, I believe that standard was short-lived and was 20x110, but was not Boost (rotor in same place as 15/12x100).

I have SRAM 900 front hubs that convert to the following with only tool-free end caps:

9x100 QR
12x100
15x100
20x110

In short, we need more info. What hub are you trying to convert, OP?

cookietom 09-24-2020 09:43 PM

Quote:

Originally Posted by ColonelJLloyd (Post 2800919)
Yes, I believe that standard was short-lived and was 20x110, but was not Boost (rotor in same place as 15/12x100).

I have SRAM 900 front hubs that convert to the following with only tool-free end caps:

9x100 QR
12x100
15x100
20x110

In short, we need more info. What hub are you trying to convert, OP?

Rocky Mtn.

I found one made in Poland,,it is 20mmx100 mm but it moved a little.


All times are GMT -5. The time now is 09:08 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.