The Paceline Forum

The Paceline Forum (https://forums.thepaceline.net/index.php)
-   Custom Bikes (https://forums.thepaceline.net/forumdisplay.php?f=14)
-   -   Richard Sachs, c.2017 - 63cm (https://forums.thepaceline.net/showthread.php?t=262793)

Clean39T 12-21-2020 10:53 PM

Richard Sachs, c.2017 - 63cm
 
2 Attachment(s)
It seems this one was born on the 4th of July, or somewhere around there - when is a frame born anyway? At conception - the point where the book is entered? Or when it's first put in the jig? The day it's shipped off to JB for paint, or when it returns? Mysteries of life. For mythic consistency, we'll say this one is a Cancer, like me - released to the world somewhere around Independence Day 2017. At least based on the date of this instagram glamour shot:

https://scontent-sea1-1.cdninstagram...c4&oe=6009A6A9

So, the frame was allegedly ordered in 2007, delivered a decade later (at the owner's behest), apparently ridden sparingly, and then offered up on that auction site where I found it and made it mine. The listing showed up pretty much right as I was finalizing details on purchasing Greg's Sachs (thread coming on that one just as soon as I glue its tubs..), so pulling the trigger on it was an exercise in irrational exuberance - which is nothing new for me, but still, buying two Sachs inside of a two week period does seem excessive - then again, when would I get the opportunity again?

As I was waiting for shipping and all that, I started gathering some parts that I figured I would use on it. I was thinking I'd go full modern on it to differentiate from the silver Chorus 10 planned for the older Sachs - and ordered up an R12 group, complete with a Stages PM and some Bora Ultra 50s. When it arrived though, I was antsy to just ride it, so I finished the build up quickly with the bars/stem and wheels I had at hand, as you may have seen in the workstand thread:

https://uploads.tapatalk-cdn.com/202...7201f53ab1.jpg

That was late last week. And at that point I wasn't sure how long it was going to take to get out on the road given the wintry mix we'd been having.

As it turned out, ride One was on Saturday. I woke up to icy roads in my part of town but heard it was dryer out east, so I headed out for what I thought would be a 40 miler or so shakedown ride. When I got to the turn at the far eastern boundary of the ride though, the sun got the better of me and I figured what the hell, I'll just do the northern loop - which I should have just enough time to get done before dark, landing me around 70-80mi.. Somewhere around mile 45 things got interesting - coming around the corner of a butte/hill, I found the SSW headwind that'd been blowing for days had picked up into the upper teens. Full power straight into that baby was 13 mph at best - the kind of wind that is scary to ride in when it flips to a crosswind and you have trucks going by..especially with a cinder-diminished shoulder given the time of year. It wasn't great. And then I made it worse by picking the diagonal road back that I figured might get me home before dark if I was lucky. Turns out that road has little to no shoulder, a horrible surface, and 60+ mph traffic. Yay! And once you're on it, there's no way out but through. I think I cursed everything in site over that 10-15mi stretch. But eventually I got through it, made the turn to home, got some shelter from the wind, and limped my way into the garage utterly cracked - 1.5 bottles, two bars, and two gels for 4.5-hrs of saddle time. Oi! Still, strip away the pain of the last third and it was a grand day out, and a lovely introduction to this amazing bike. I took no pictures. Sorry. Ended up being about 77mi I think, give or take.

Ride Two was today. The weather shifted and I had a window to get out on the Solstice for some happy miles under mostly sunny skies and low-50s temps. It was amazing. Another perfect day on a perfect bike. Still some wind, but manageable. And I got to push the limits of the 39x25 on this one to find that it is indeed perfectly adequate for these parts - we have short steeps but no really long 15%+ grades that become troublesome with that taller setup. The tradeoff win here is everywhere else you have perfect gears and a fully-usable cassette in both rings. Lovely. In between rides I swapped to Ritchey Neoclassic bars and a Deda stem. The stem diameter makes me happy when looking down at it and the bars gel better with my hands than the 3T Superleggera - but I would still like a custom stem with a -16* rise to get me to a perfectly level stem/TT/drops situation. I have to say these Vision KOM wheels are perfect here too - they're around 1350g, excellent braking, and nice wide profile that puts the Veloflex 28s with latex tubes in a perfect posture. Good times.

After two rides, I'm really happy with its performance and the aesthetics of the build, and can't really see changing a thing at this point (other than messing with the stem and spacers to get that just right and re-wrapping with some Silca tape). Not sure what I'll do with the R12 at this point, or the Boras - maybe come spring when the roads are cleaner and dryer, or if I'm traveling somewhere with different terrain I'll get inspired to throw that kit on it instead.

https://forums.thepaceline.net/attac...1&d=1608612534

https://forums.thepaceline.net/attac...1&d=1608612547

So there you have it. I know no-one will believe it but I'll still say it anyway - this one is a keeper - maybe for a year, maybe for ten, maybe forever, if I live that long. I still want a lugged Kirk Onesto and a DiNucci, and I'm going to get one of those in 2021. But unless I fall on hard times, I can't see a reason this one would leave the garage.

.
..
.

:fight:

Imaking20 12-21-2020 11:26 PM

I feel like you've skipped over at least one ride. Maybe previous iterations don't count? :D

Love the look of the Campy on there. Almost makes me want to roll Campy when the Mosaic gets rebuilt!

Clean39T 12-21-2020 11:40 PM

Quote:

Originally Posted by Imaking20 (Post 2850616)
I feel like you've skipped over at least one ride. Maybe previous iterations don't count? :D



Love the look of the Campy on there. Almost makes me want to roll Campy when the Mosaic gets rebuilt!

Different bikes.. The c.2007 Sachs will get its own thread in due time.

Sent from my Pixel 2 XL using Tapatalk

Beldar77 12-21-2020 11:44 PM

[QUOTE=Clean39T;2850611

And then I made it worse by picking the diagonal road back that I figured might get me home before dark if I was lucky. Turns out that road has little to no shoulder, a horrible surface, and 60+ mph traffic. Yay! And once you're on it, there's no way out but through.
[/QUOTE]

Sounds like Powell Butte Road / Highway? Yeah it's not the best road to be on for sure.

Imaking20 12-22-2020 12:02 AM

Quote:

Originally Posted by Clean39T (Post 2850620)
Different bikes.. The c.2007 Sachs will get its own thread in due time.

Sent from my Pixel 2 XL using Tapatalk

Hahahahahaha. Lolwut?!?! They're breeding?!?!

hollowgram5 12-22-2020 06:51 AM

I'm excited for you. I look forward to getting to throw a leg over this one when I come up that way.

macaroon 12-22-2020 07:12 AM

Something like this style of stem might suit?

https://cdn.shopify.com/s/files/1/21...rofile_1_9.jpg

Stj 12-22-2020 07:36 AM

Beautiful! Would love to hear how this frame compares to your other RS frame.

This color combination works really well with modern black components.


Sent from my iPad using Tapatalk

herb5998 12-22-2020 08:19 AM

As always, a great build, and love both the Sachs you have, that color is great.

Toddtwenty2 12-22-2020 08:54 AM

Quote:

Originally Posted by Clean39T (Post 2850611)

I still want a lugged Kirk Onesto and a DiNucci, and I'm going to get one of those in 2021.

This bike is really lovely. It has a very elegant, graceful look.

I can't wait to see your Dinucci project. I was talking with Mark a couple months ago and really enjoyed the conversations. His small touches like the lug shapes, drop-out aesthetics, and frame angles just really look beautiful to my eye. Unfortunately, his bike concept that is built around the custom tubesets has too much overlap with the MRB and doesn't quite fit into a justifiable +1 on my end. I am very eager to see yours come to life and hear ride reports.

Apologies for the drift - continue ogling this beautiful Sachs.

andeww 12-22-2020 09:14 AM

Nice!
I still have your red Sachs. If this fits you well the red one must have been much too small! Enjoy

Clean39T 12-22-2020 10:25 AM

Quote:

Originally Posted by andeww (Post 2850731)
Nice!

I still have your red Sachs. If this fits you well the red one must have been much too small! Enjoy

Yes, it was on the smaller side though not that far off - I'm glad you are enjoying it!

https://uploads.tapatalk-cdn.com/202...381b50fe49.jpg

Clean39T 12-22-2020 10:49 AM

Quote:

Originally Posted by Imaking20 (Post 2850623)
Hahahahahaha. Lolwut?!?! They're breeding?!?!

Slightly more difficult than breeding carbon tubulars but it is possible.

Clean39T 12-22-2020 10:51 AM

Quote:

Originally Posted by macaroon (Post 2850670)
Something like this style of stem might suit?

https://cdn.shopify.com/s/files/1/21...rofile_1_9.jpg

I'm trying one of those on the silver build but they are for 1.125" steerers, so it probably won't look quite right. A custom steel stem is really the only answer.

jtbadge 12-22-2020 10:52 AM

Glad you're digging NeoClassics - they really are a great shape.

Quote:

Originally Posted by Clean39T (Post 2850798)
I'm trying one of those on the silver build but they are for 1.125" steerers, so it probably won't look quite right. A custom steel stem is really the only answer.

not to mention all of the added stack height. not really a good match for this application.


All times are GMT -5. The time now is 02:52 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.