Canyon geometry question (slightly dumb)
Does anyone have a familiarity with the Canyon Endurace geometry chart on the Canyon website? (I wish I could embed the chart here but I am hopeless with that sort of thing).
My question is- in relation to seat tube angles, they only show 73.5 degrees in the column relating to medium frames- for all of the other frame sizes there is only a blank shown for the seat tube angle. My guess is that this means that all sizes have a 73.5 seat tube angle, but does anyone know for sure? |
Page 10 shows 73.5 for all sizes:
https://www.canyon.com/download/2015...yer_US_Web.pdf Page "16" of the catalog... "10" of the pdf |
That PDF is for the 2015 Canyon line, but the way the chart is constructed is that any number in the middle means it applies to all sizes.
I don't know why they do that when in just causes confusion. |
Out of curiosity, why do you care about the sta?
|
Endurace was redesigned for 2018. Not sure how the geo has changed, but you should check with Canyon for the numbers. Their email customer support is slightly slow to respond sometimes, but usually very thorough when I contact them.
fwiw I have a 2018 Endurace and love it. |
Quote:
|
Quote:
What I have found works is a shallower STA. One of my current bikes has a 72 STA with a "normal" seatpost, and on another there is a 73 STA with an extra setback seatpost (FSA). The centre of the saddle is the same distance behind the centre of the bottom bracket on each bike. This gives a much larger setback than is apparently "normal" but it seems to work for me. My untutored take on it is that I probably have long femurs relative to everything else. I am therefore wary of STA's any steeper than 73 and will probably therefore pass on the Canyon, although they are very attractive. Am I missing any other obvious solution? |
Quote:
|
Quote:
|
For that matter, the choice of saddle and it's rail shape/positioning can play a big part in determining how far back (or forward, as in my case) that the rider can sit.
Just be sure to select a post that is known to be strong enough for your overall situation including total setback, rider weight and how hard and fast that you are crossing over how big of a "road surface feature scale". |
Quote:
|
Quote:
For most folks, a 25mm set back seat post will work with a standard saddle pretty well between 72 and 75° STA, which is why it doesn't come up a lot. |
Quote:
|
Quote:
I just don't know anyone who has multiple road bikes of different brands but all of them have Dura Ace 9000 and the same model Easton bars. Most people have multiple bikes to get something better or different. |
Quote:
That said, I have 6 road bikes and most of them use the same saddle, same bars, and same group. The bikes are different and my fit is achieved by seatposts of different setback or stems of different length. I have a few friends who have even less variation than me from one setup to another and the main variable is really just the frame. |
All times are GMT -5. The time now is 01:22 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.