The Paceline Forum

The Paceline Forum (https://forums.thepaceline.net/index.php)
-   The Showcase (https://forums.thepaceline.net/forumdisplay.php?f=21)
-   -   Sklar (https://forums.thepaceline.net/showthread.php?t=232740)

AdamSklar 01-08-2019 06:45 PM

Sklar
 
Hi Everyone,

Trying to post over here a little more these days. Here is some fun stuff from the past few months.

Steel All-road
https://static1.squarespace.com/stat...g?format=1500w

https://static1.squarespace.com/stat...pg?format=750w


Lori's Ti All road
https://static1.squarespace.com/stat...g?format=1500w

https://static1.squarespace.com/stat...pg?format=500w

https://www.sklarbikes.com/blog/skla...ravel-bike-mal
https://static1.squarespace.com/stat...g?format=1500w

https://static1.squarespace.com/stat...pg?format=500w

Bill's Titanium Travel Bike
https://static1.squarespace.com/stat...g?format=1500w

https://static1.squarespace.com/stat...pg?format=500w

AdamSklar 01-23-2019 10:31 AM

Trying out some new geometry concepts on this bike. Also first go with the new 3D printed chainstay yokes. So far so good!

https://static1.squarespace.com/stat...g?format=1500w

https://static1.squarespace.com/stat...pg?format=500w

https://static1.squarespace.com/stat...pg?format=500w

https://static1.squarespace.com/stat...pg?format=500w

ultraman6970 01-23-2019 04:31 PM

Ultra likes....!! :)

boomforeal 01-23-2019 07:58 PM

lovely bike adam. care to share what geometry stuff you're working on with this?

Andy sti 01-23-2019 10:36 PM

Such great stuff. Thanks for posting!

AdamSklar 01-25-2019 09:03 AM

Thanks all!

Quote:

Originally Posted by boomforeal (Post 2490107)
lovely bike adam. care to share what geometry stuff you're working on with this?

Here are the important numbers on this bike:
https://scontent-sea1-1.xx.fbcdn.net...d3&oe=5CC7C94E

I had pretty similar front end geo on my squish bike that I built last Spring and really loved it. So far it's feeling awesome on the hardtail, though Montana riding in the Winter is pretty limited.

andeww 01-25-2019 01:22 PM

Are those 29x2.6 Minions? how do you like them?
i am considering going from 3.0 down to something a tad smaller and knobby.

AdamSklar 01-25-2019 05:46 PM

Quote:

Originally Posted by andeww (Post 2490858)
Are those 29x2.6 Minions? how do you like them?
i am considering going from 3.0 down to something a tad smaller and knobby.

These are actually the 3.0's. They measure 2.8 though. I have run the 2.6's on other bikes and like them, though they only measured in at 2.5" for me, they are a touch larger diameter than the 2.5" WT, but I wish the 29x2.8" Minions were easier to find these days. I found that to be a good size.

AdamSklar 01-28-2019 03:43 PM

Steel gravel frame headed to get painted by Pucci. Real excited to see what he does with it.
https://scontent-sea1-1.cdninstagram...ninstagram.com

charliedid 01-29-2019 03:12 PM

So great

Sjambok 02-04-2019 02:44 PM

Awesome workmanship!

Also enjoyed your podcast episode of "We Got to Hang".

dvancleve 02-06-2019 07:31 AM

Love the mix of Ritchey and S&S connectors on the Ti travel bike. Seems like a really smart combo that saves some weight and moolah...

Doug

AdamSklar 02-06-2019 09:00 AM

Quote:

Originally Posted by Sjambok (Post 2495962)
Awesome workmanship!

Also enjoyed your podcast episode of "We Got to Hang".

Hey Thanks! That one was really fun to do!

AdamSklar 02-06-2019 09:01 AM

Quote:

Originally Posted by charliedid (Post 2492798)
So great

Cheers!

Quote:

Originally Posted by dvancleve (Post 2496706)
Love the mix of Ritchey and S&S connectors on the Ti travel bike. Seems like a really smart combo that saves some weight and moolah...

Doug

Thanks! Only way to do it with my curvy top tubes as well. It takes a lot of work to fabricate the seat tube coupler, but I really love how they turn out. I have another cool Ti travel bike coming up in the queue pretty quick here.

AdamSklar 02-06-2019 09:05 AM

This project has been in the works for quite a while. Really sweet to see it come together!

I first built a pair of "modern-ish" bullmoose bars for one of my bikes years ago and people have been begging for them since. doing these in custom geo and getting everything right is incredibly hard. So I designed and built a single bar geometry to use and the tooling to make them as well. So cool to see this from start to finish. Off to the plater now...

https://scontent-sea1-1.xx.fbcdn.net...a8&oe=5CF5DFD8

https://scontent-sea1-1.xx.fbcdn.net...49&oe=5CB9584F


All times are GMT -5. The time now is 12:02 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.