View Full Version : Inflation on 25's?
jmeloy
11-04-2011, 05:28 PM
Started riding a new set of HED Ardennes with 25's. What pressure should I try?
Thanks
eddief
11-04-2011, 05:32 PM
i am 195 and ride 85 front 90 rear.
rice rocket
11-04-2011, 05:44 PM
i am 195 and ride 85 front 90 rear.
Do you ever have issues w/ destroying rims?
I nail potholes about once a month, and I'm always afraid of rim destruction. I've already bent a front, and I was running 100 psi. Granted, it was a pretty nasty raised lip on a drain cover, but I weigh only 140 lbs.
Edit: I don't have wide rims though, only the standard 19mm wide.
rnhood
11-04-2011, 05:48 PM
I run 25 Conti 4000 on DA wheels at 80# front and rear. Never flat. Superb ride. I weigh 180#. 80# is as safe as apple pie. At least on DA wheels it is.
norcalbiker
11-04-2011, 05:49 PM
I was told by Reynolds Tech to put about 130psi on my 46. I weigh 165lbs.
I was also told by Enve Tech to put 125psi on my brother-in-laws Enve 45. He weigh 210lbs
eddief
11-04-2011, 05:59 PM
and even at 85ish things seem nearly rock hard to me. i can barely imagine riding my tires inflated to 120. to each their own inflation :).
oh by the way, all the roads in Berkeley have just gotten a fresh coat of resin and been smoothed to the texture of a baby's bottom. so no worries in our fair city.
Do you ever have issues w/ destroying rims?
I nail potholes about once a month, and I'm always afraid of rim destruction. I've already bent a front, and I was running 100 psi. Granted, it was a pretty nasty raised lip on a drain cover, but I weigh only 140 lbs.
Edit: I don't have wide rims though, only the standard 19mm wide.
don compton
11-04-2011, 06:00 PM
I have both Ardennes and some handbuilts with A23's. With my 700-25 vresdesteins, I run 75f and 90r. I weigh 170 and ride a heavy steel bike. I have never experienced a pinch flat or damaged rims with this combo. The ride and handling are great.
Don C.
foo_fighter
11-04-2011, 06:16 PM
Are these carbon? clinchers? If you start at 130psi, how do you not exceed safe pressures on descents?
I was told by Reynolds Tech to put about 130psi on my 46. I weigh 165lbs.
I was also told by Enve Tech to put 125psi on my brother-in-laws Enve 45. He weigh 210lbs
fourflys
11-04-2011, 06:29 PM
with the wider rim I'm sure you can get away with 90 rear/85 front.....
ergott
11-04-2011, 06:33 PM
158lbs.
80 front and 85 rear.
Butter.
xeladragon
11-04-2011, 07:03 PM
150lbs.
85/90.
C5 Snowboarder
11-04-2011, 07:22 PM
I run 95 front and 100 back.. no reason other than I am pretty old and cant remember sometimes--- so those numbers are the numbers represent the range of age I hope to live to. BTW -- if I remember correctly yesterday I weighed 210 lbs. or 2.80 lbs per inch
Lifelover
11-04-2011, 07:40 PM
250# generally run at 25 PR 2's at 100 psi and have no reservations running the front in the 80's and rear in the mid 90's
weiwentg
11-04-2011, 07:43 PM
~120lbs. just under 80 rear, 75 front on 23mm rims.
norcalbiker
11-04-2011, 07:50 PM
Are these carbon? clinchers? If you start at 130psi, how do you not exceed safe pressures on descents?
Yes they are both carbon clincher.
bobswire
11-04-2011, 08:10 PM
147 Lbs, 90/95 Vittoria pave / corsa cx clinchers
Steve in SLO
11-04-2011, 08:16 PM
185#
80f/85r on 23mm rims
85/90 on standard rims
Jack Brunk
11-04-2011, 08:18 PM
164lbs slender and shy.
90 front 92-95 lbs rear
Using Conti GP4000 tubies.
jmeloy
11-04-2011, 09:32 PM
I'm 190 and have been riding them at 100. Think I'll drop them 10 and see how they do!
Kontact
11-04-2011, 09:47 PM
The Reynold's tech guy must have been joking.
Food for thought from Michelin:
http://www.michelinbicycletire.com/michelinbicycle/img/pressurechart121405B.jpg
foo_fighter
11-05-2011, 12:45 AM
Yes they are both carbon clincher.
I hope you're not in a hilly area....Norcal is not flat. I would rethink those pressures especially on carbon clinchers. You're approaching 150-160 if the rim heats up to 200F.
alancw3
11-05-2011, 05:29 AM
195# hed ardennnes friont 90 rear 95. of course what i do is pump to 95/100 and then can ride for three days w/o refilling.
Nelson99
11-05-2011, 05:30 AM
(Aluminum rims only for me)
Pirated from various sources I will credit when I get back to my other computer. I also plan to modify (improve) an xl spreadsheet I found and will also post that and the original. For the moment I am trying the pressures calculated here to see how they work out for me.
I weigh ~210, figure total load at ~230
oldpotatoe
11-05-2011, 07:18 AM
I was told by Reynolds Tech to put about 130psi on my 46. I weigh 165lbs.
I was also told by Enve Tech to put 125psi on my brother-in-laws Enve 45. He weigh 210lbs
They are just trying to protect the rims at the expense of a crappy ride, IMHO.
A real advantage to aluminum rims. I use 95 psi on my wet weather clinchers, DT 585, but if I kill one because of too low PSI(haven't happened in 4 years), new rim isn't $600+.
I weigh .1 offa ton.
Carbon rims are nice but you are saving maybe a pound or so(600 grams) over aluminum wheels. Where a 200 pound rider and 18 pound bike...1.5 divided by 218, carry the.....add the......subtract the.......
.6 of 1% difference?
Nope, not trying to start a carbon vs aluminum wheel argument...discussion group, I'm discussin'
binxnyrwarrsoul
11-05-2011, 07:22 AM
200-ish
90 in front.
100 in back.
Joachim
11-05-2011, 07:25 AM
They are just trying to protect the rims at the expense of a crappy ride, IMHO.
A real advantage to aluminum rims. I use 95 psi on my wet weather clinchers, DT 585, but if I kill one because of too low PSI(haven't happened in 4 years), new rim isn't $600+.
I weigh .1 offa ton.
Carbon rims are nice but you are saving maybe a pound or so(600 grams) over aluminum wheels. Where a 200 pound rider and 18 pound bike...1.5 divided by 218, carry the.....add the......subtract the.......
.6 of 1% difference?
Nope, not trying to start a carbon vs aluminum wheel argument...discussion group, I'm discussin'
someone once said clinchers are for nancy's..but i cant remember who that was or can I? :)
oldpotatoe
11-05-2011, 07:51 AM
[QUOTE=Jack Brunk]164lbs slender and shy.
Likes classical music and quiet walks in the park.
oldpotatoe
11-05-2011, 07:52 AM
someone once said clinchers are for nancy's..but i cant remember who that was or can I? :)
Yada, yada, one thing even I can't do is get a wet tubie to stick to a wet tubie rim and yes, I am a nancy in the rain.
[QUOTE=Jack Brunk]164lbs slender and shy.
Likes classical music and quiet walks in the park.
:banana: Very good!
I'm 245-250, I just pump them to about 90 or so! Keep in mind that I am using Schwalbe Mar. plus in that tire size.
When I'm going to load them up, as I am car free.
Add 50-75 lbs for a food run. Then I pump them up to the max on the sidewall.
Chance
11-05-2011, 12:28 PM
The Reynold's tech guy must have been joking.
Food for thought from Michelin:
http://www.michelinbicycletire.com/michelinbicycle/img/pressurechart121405B.jpg
That seems a little high as if meant more for speed than comfort.
Fixed
11-05-2011, 12:50 PM
90 ft -100 rear here
cheers
biker72
11-06-2011, 10:02 AM
I'm almpst 200 pounds with everything I carry. On 25's I'll run 100 on the rear and 90 front.
Kontact
11-06-2011, 11:29 AM
That seems a little high as if meant more for speed than comfort.
I think it is mainly meant to prevent pinch flats. Michelin is unlikely to publish something that requires a specific kind of street or riding style to work, so these are "safe" numbers. Going below them may work, but not for everyone.
The main reason I posted it is to demonstrate how far off the Reynolds guy and some others are from reality.
Wilkinson4
11-06-2011, 11:44 AM
On 19mm rims - 700cx28mm I am about 78/82. On my 650bx42mm, about 53/55, super comfy:D 145-150#.
On a 23mm rim I would start with what I run and then just field test it until I got the right ride/performance for me.
mIKE
everbeek
11-06-2011, 12:10 PM
Vittoria Open Pave (24 mm) or Open Corsa (26 mm measured) on 23 mm rim. 90 front/95 rear. 240 pounds.
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.