PDA

View Full Version : SOLD: Shimano Ultegra 6700/Mavic Open Pro Wheelset


oldfatslow
09-19-2011, 08:52 PM
SOLD

TimD
09-20-2011, 08:25 AM
.

oldfatslow
09-20-2011, 07:29 PM
Photos of the wheel set. Brand new in box. Still shrink wrapped. Freehub covered in cardboard.

There are brand new wheels which have never been unwrapped.

AngryScientist
09-20-2011, 08:55 PM
where are you located, out of curiosity?

oldfatslow
09-21-2011, 06:52 AM
I'm in Austin, TX.

I check the USPS site and it looks like Parcel Post shipping to either coast would only be $22.

Rouleur88
09-21-2011, 03:24 PM
Hello, could a 250 pound Rider use these rims? I purchased a frame on this forum a few days ago and need to find a wheelset. Thank you for your time.

Ken Robb
09-21-2011, 03:43 PM
I think a big rider can use these for any reasonable road riding. I have put several thousand miles including some easy off road use on similar wheels when I weighed as much as 215lbs and never had to true them.

biker.caliente
09-21-2011, 03:52 PM
It should be no problem, in terms of weight concern. I am 205 on a good day but more of the time at 210. I have exactly the same wheel set from Performance for about 1K miles without a single issue. They stayed perfectly true and round throught some nasty pot holes and crappy roads. These wheels are bomb-proof.

oldfatslow
09-22-2011, 08:31 AM
All, I'm putting these on eBay on Sunday.

I'd prefer to sell them here for $270 shipped via parcel post anywhere in the continental US.

slowandsteady
09-22-2011, 08:46 AM
This is a great deal. Weight should be no issue whatsoever. Most builders will tell you the Ultegra hubs are bombproof and provide 95% of the performance for less than half the cost of their big brother DA hubs.

I can't believe these have not been snapped up yet...I think too many of us are looking for fancy, super light, top of the line wheels so these are going under appreciated on this particular forum.

mitchel@century
09-22-2011, 08:53 AM
If the rear was a 36 hole, I'd be all over it.

oldpotatoe
09-22-2011, 09:03 AM
Hello, could a 250 pound Rider use these rims? I purchased a frame on this forum a few days ago and need to find a wheelset. Thank you for your time.

Perhaps if you are a 'light' rider in terms of riding style. I would have a good wheelbuilder true/round/tension/dish and stress relieve these before anybody rides them tho. BUT 36 hole would be a much better choice for you, IMHO.

oldfatslow
09-22-2011, 09:35 PM
Thanks for the interest. Deal pending.