PDA

View Full Version : FS: Vintage Campagnolo, Carbon bars and post, 3T/Mavic Quill Stems


Lovetoclimb
09-07-2011, 04:34 PM
Fall cleaning sale:

Campagnolo A-B Chorus Gruppo
- Early 90s vintage group removed from same period Falcon frame
- Campagnolo's first attempt at index shifting
- Missing Fr. Der., chain, cassette
- Crank length: 170 mm
- Chainrings: 52/42
- Includes: Pedals with toe clips and original leather straps, Rr. Der., Crankset, Brake levers, Downtube shifters, Mono-planer brakes
- $210 shipped and insured
(Special thanks to OldPotatoe for helping ID the gruppo in my research)


ITM Millenium Carbon Handlebars
- 42cm width c-c from the drops
- 16cm drop c-c from top to the drops
- 10cm reach c-c
- Monocoque carbon, 100% made in Italy
- No slip zone for the ergos
- Front and rear cable routing grooves
- 25.8 clamp diameter
- This Model (http://www.repartocorse.com/itm-millenium-carbon-handlebars.htm)
-$50 shipped


3T Quid Quill Stem
-NOS
-Purchased, installed, never ridden
-140 mm
-$50 shipped


Mavic Quill Stem
-90mm
-Removed from old frame found in my LBS
-$35 shipped


Pictures Here:
https://picasaweb.google.com/Sam.Klontz/PartsForSale?authuser=0&feat=directlink

ultraman6970
09-07-2011, 04:36 PM
https://picasaweb.google.com/Sam.Klontz/BikePartsAndAccesories

Lovetoclimb
09-07-2011, 04:40 PM
Strange, linked worked when I previewed the post. Confirmed, it should be the right one. I erased the original and started over.

https://picasaweb.google.com/Sam.Klontz/PartsForSale

bicycletricycle
09-07-2011, 05:13 PM
i think that that is not a record crankset.

Pegoready
09-07-2011, 05:14 PM
i think that that is not a record crankset.

Agreed. Looks like an FSA. Still a great price.

ultraman6970
09-07-2011, 05:17 PM
It is, it is one of the 1st ones, have no idea how many units they actually made tho, havent seen many. But is probably the 1st model, thats why is confusing.

old_fat_and_slow
09-07-2011, 05:24 PM
It is, it is one of the 1st ones, have no idea how many units they actually made tho, havent seen many. But is probably the 1st model, thats why is confusing.

U shure about that? I have one of the early models that is carbon weave, and not chopped fiber, and it had the same shape as the later square taper models, just the weave instead of the random fibers. Never seen a Campag crank that looked like this. However, I am not an expert on the subject.

lhuerta
09-07-2011, 05:39 PM
It is, it is one of the 1st ones, have no idea how many units they actually made tho, havent seen many. But is probably the 1st model, thats why is confusing.


First generation carbon cranks were as pictured below. Does what you have include any Campy marking (besides the rings)? The 135mm spider and hidden 5th spider arm are interesting and consistent with Campy. However, it just seems that the beveled/sculpted shape is a bit out of the ordinary, even for a Campy prototype. An interesting specimen, nonetheless. Please tell us more...Lou

ultraman6970
09-07-2011, 05:55 PM
I believe u are right, the shape is different... interesting crankset tho, who else does 135 bcd stuff besides miche??

U shure about that? I have one of the early models that is carbon weave, and not chopped fiber, and it had the same shape as the later square taper models, just the weave instead of the random fibers. Never seen a Campag crank that looked like this. However, I am not an expert on the subject.

milehighness
09-07-2011, 06:48 PM
Well if those are ISO taper then I will take them off your hands for you. Did you use an ISO BB spindle?

Lovetoclimb
09-08-2011, 06:14 PM
Crankset and KNOG sold. Adding vintage Campy group soon.

Lovetoclimb
09-18-2011, 06:10 PM
Also lowered prices. Ebay is a headache, much preferable to move stuff here.

Lovetoclimb
09-18-2011, 07:14 PM
Everyone loves celeste!

gianni
09-18-2011, 10:19 PM
I'm in for the saddle.

Pm sent.

duh... the saddle is gone!

bicycletricycle
09-19-2011, 08:56 AM
pmd on the group

Lovetoclimb
09-26-2011, 07:10 PM
ITM Bar and Quill stems still available