Joe
06-11-2011, 11:38 PM
This is a 58cm steel frame, serial #83902, built either in 1982 or 1983. The bike is being sold as pictured, including wheels and all components shown. The bike was originally built with Campy Record components, as available at the time. The stem/handlebar and gearing were reconfigured a couple years ago for use by a family member; the freewheel is a six speed Shimano, cogs are 14-16-18-21-24-28.
There are numerous scratches/chips in the paint, but no dents in any of the tubes. I am the original owner and am in California; the bike has been stored indoors and has not been used in the rain.
Serotta was not able to provide measurements or geometry for this frame, but I have taken the following measurements:
Seat tube (measured from center of top tube to center of bottom bracket) – 58cm
Top tube (measured from center of head tube to center of seat tube) – 57.2 cm
Chainstay (measured from center of bottom bracket to center of rear dropout) – 41.9cm
Head tube – 16cm
Several high resolution pics are here:
http://s1126.photobucket.com/albums/l607/hereinca/
I’m glad to provide additional measurements or pics – feel free to ask.
$545 + shipping
There are numerous scratches/chips in the paint, but no dents in any of the tubes. I am the original owner and am in California; the bike has been stored indoors and has not been used in the rain.
Serotta was not able to provide measurements or geometry for this frame, but I have taken the following measurements:
Seat tube (measured from center of top tube to center of bottom bracket) – 58cm
Top tube (measured from center of head tube to center of seat tube) – 57.2 cm
Chainstay (measured from center of bottom bracket to center of rear dropout) – 41.9cm
Head tube – 16cm
Several high resolution pics are here:
http://s1126.photobucket.com/albums/l607/hereinca/
I’m glad to provide additional measurements or pics – feel free to ask.
$545 + shipping