BB30 Adapters?

[TexasJohn]

Ultratorque with BB30 Cannondale frame; which is the better adapter to use: 1) Campy BB30 press-in cups; or 2) a press-in adapter sleeve that converts the BB to English thread, then use the Record BB I currently use? I'm a big guy (6'3" and 215 lbs) and don't want any squeeks or clicks. Links to both:

http://www.competitivecyclist.com/product-components/2010-campagnolo-ultra-torque-bb30-adapter-6687.188.0.html
http://www.universalcycles.com/shopping/product_details.php?id=29424

Also, is one or the other easier to remove once pressed into the BB30 Shell?

Other (better) options?

Thanks!

[wasfast]

I am using an UT crank in a frame with BB30. I went with the FSA but would probably use the Campy cups instead if I did it over again. The FSA is a very solid solution provided the fit to the bb is on spec.

[oldpotatoe]

Ultratorque with BB30 Cannondale frame; which is the better adapter to use: 1) Campy BB30 press-in cups; or 2) a press-in adapter sleeve that converts the BB to English thread, then use the Record BB I currently use? I'm a big guy (6'3" and 215 lbs) and don't want any squeeks or clicks. Links to both:

http://www.competitivecyclist.com/product-components/2010-campagnolo-ultra-torque-bb30-adapter-6687.188.0.html
http://www.universalcycles.com/shopping/product_details.php?id=29424

Also, is one or the other easier to remove once pressed into the BB30 Shell?

Other (better) options?


Thanks!

Fewer 'things' in the BB shell with the Campagnolo made BB30 adapter. Presses in like a headset cup..grease liberally. install tight..grease UT bearings, spindle, cups, ETC.

[oldpotatoe]

I am using an UT crank in a frame with BB30. I went with the FSA but would probably use the Campy cups instead if I did it over again. The FSA is a very solid solution provided the fit to the bb is on spec.

Doubt you are using FSA cups or bearings with a Campagnolo crank. FSA pressfit BB30 perhaps.