Clear Coat on ST Stays

[Larry]

Does anyone have any advice on what to use to cover or touch-up the carbon stays on a CDA? I have gotten careless these days, and have a number of scratches, skinned up spots, etc. that have marred the clear coat.

[dave thompson]

Nail polish.

[Peter B]

Or you can pick up a small bottle of automotive clear coat touch-up paint from your local parts store. Once it dries well try carefully sanding w/ progressively finer grits, ending with polishing compound. You'll be amazed at the results you can achieve.

[SoCalSteve]

Or you can pick up a small bottle of automotive clear coat touch-up paint from your local parts store. Once it dries well try carefully sanding w/ progressively finer grits, ending with polishing compound. You'll be amazed at the results you can achieve.

Exactly what he said! You can use clear nail polish as well...But, the key is a very high end polishing compound for the final touch.

Good luck!

[Larry]

One of the serviceman at the shop did a great job of touching everything up,
and then buffing it out. Another great service by the folks at RBM in north Dallas.