PDA

View Full Version : Anyone Ever Converted a Campy 8sp hub to 10sp


sean
09-28-2010, 02:27 AM
By swapping the freehub body? Just curious if it's possible or not. I found a set of NOS Record OR hubs and I would love to run them with a 10sp triple setup.

rockdude
09-28-2010, 07:06 AM
I maybe wrong but I don't think you can swap them.

buldogge
09-28-2010, 07:43 AM
Hey...Not sure about doing it on Record...but...I recently swapped a "modern" Mirage freehub onto my mid-90's Athena 8s hubs.

The swap required switching over all the guts/axle as well.

Works perfectly...picked up the hub NOS on Ebay for $17.

Make sure you match the axle size on the donor to your hub and you should be good to go!

Good luck....

-Mark in St. Louis

oldpotatoe
09-28-2010, 07:48 AM
By swapping the freehub body? Just curious if it's possible or not. I found a set of NOS Record OR hubs and I would love to run them with a 10sp triple setup.

Sure, just need a Record or Chorus 8s hub(or that Record OR hub, same freehub, longer axle) and a 1997 Record or 1998 Chorus 9s(also 10s and 11s) freehub body(steel or titanium axle), it's plug and play but these freehub bodies, last made over a decade ago, are scarce.

oliver1850
09-28-2010, 08:51 AM
.