high quality platform pedal suggestions?

[d_douglas]

I am having a bling cruising/touring bike built for my wife with an Alfine drivetrain. One thing I have not sorted is what pedals to use - she wears jogging shoes/etc. or flipflops, so no clipless.

I have put Crank Bros 5050s on her other bike and they seem nice, but too bulky for this bike. Can anyone suggest a pair of nice, cartridge bearing platform pedals that are super smooth/watertight and durable but are not massive badass DH pedals?

Thanks,

Darren

[TimmyB]

I'd check out the white industries pedals (http://www.whiteind.com/pedal.html) . I've got a couple friends that love theirs... And they're made in the USA too :beer:

[AngryScientist]

velo orange sure has some nice ones. sound like they would be perfect for what you're building up...

http://ep.yimg.com/ca/I/yhst-84224226242177_2120_13690430
http://ep.yimg.com/ca/I/yhst-84224226242177_2120_13781125
http://ep.yimg.com/ca/I/yhst-84224226242177_2118_77552591
http://ep.yimg.com/ca/I/yhst-84224226242177_2118_77629556

[rice rocket]

I'd check out the white industries pedals (http://www.whiteind.com/pedal.html) . I've got a couple friends that love theirs... And they're made in the USA too :beer:

Seriously? I've never seen (or even considered someone would make) $200-250 platform pedals. :crap:

MKS GR-9's, most shops that carry MKS will have 'em. $20-25, they take top clips quite well. It's a nice flat platform; I never liked the ones that leave creases into your shoe sole.

http://ecx.images-amazon.com/images/I/41k8BL%2BJ1yL._SS500_.jpg

[TimmyB]

Seriously? I've never seen (or even considered someone would make) $200-250 platform pedals. :crap:
I am having a bling cruising/touring bike built
gr9's are not blingy. the white industries are. just sayin' :beer:

PS I use a set of gr9's on one of my bikes.

[alexstar]

Speedplay makes a bmx-type pedal that has a lower profile than any similar pedal. A little pricey, around $100 IIRC, but very nice.

[Ken Robb]

I like the MKS Touring pedals. They are loose ball bearings and are delivered too tight w/too little grease but they are easy to take apart, grease and adjust so they are silky smooth. They are the pretty bottom ones in the photo above.
Unlike many platforms intended to accept toe clips these are the same on both sides so starting off requires no feeling around to find the flat side.

[BengeBoy]

These are interesting.

Rivendell sells these as the "Grip King" pedals at some very high price -- they're made by MKS and cost a lot less elsewhere.

I have them on a commuter bike; they are nice to use if you aren't using any toe clips at all:

http://www.amazon.com/MKS-Lambda-Platform-Pedal/dp/B001GSQVEE/ref=cm_cr-mr-title

[oldpotatoe]

I am having a bling cruising/touring bike built for my wife with an Alfine drivetrain. One thing I have not sorted is what pedals to use - she wears jogging shoes/etc. or flipflops, so no clipless.

I have put Crank Bros 5050s on her other bike and they seem nice, but too bulky for this bike. Can anyone suggest a pair of nice, cartridge bearing platform pedals that are super smooth/watertight and durable but are not massive badass DH pedals?

Thanks,

Darren

MKS Touring pedals

[Joellogicman]

Seriously? I've never seen (or even considered someone would make) $200-250 platform pedals.

I have a set on my commuter and a set on my touring bike. Both matched with Bruce Gordon half clips.

White Industry platforms are not only beautiful: The bearings roll beautifully, they fit my feet perfectly, they are durable and easy to clean. Even the grease ports are capped with a lovely solid brass bolt.

The way I see it, I am on my commuter almost every day of the year. When I am on a tour, I'm riding 7 - 10 hours a day. There are times on the ride I sit up straight without my hands on the bars. Sometimes I stand up off the saddle. Unless I am stopped, however, my feet are always on the pedals. Of all the components on a bike, pedals are certainly the most used if not the most important.

To the OP - highly recommend the White Industry Pedals.

[11.4]

GR-9's aren't that wide. It's the problem with RX-1's and several other Japanese pedals. You'll either be rubbing your foot on the crankarm or hanging off the outside of the pedal, or both. And the GR-9's are pretty rough in the bearing department.

If you want a nice, not unreasonably priced, platform pedal, check the downhill pedals. With the little adjustable screw heads your shoes really stay in place with them, the decent ones have good bearings, and they are just comfortable for a situation like yours. Either the Shimano or Speedplay or Crank platform pedals in this category are all good, depending on what you want to pay.

The TA pedals are rather wide and pretty sturdy, but I've found they tend to get rattly after a while. You can look for some old Campy Record road pedals, which are wider than the Japanese ones but not as wide as the downhill pedals. And there are other boutique pedals around. But I'd just go with the downhill pedals if you don't want to be using clipless or using toe clips and straps.

[Lifelover]

I am having a bling cruising/touring bike built for my wife with an Alfine drivetrain. One thing I have not sorted is what pedals to use - she wears jogging shoes/etc. or flipflops, so no clipless.

I have put Crank Bros 5050s on her other bike and they seem nice, but too bulky for this bike. Can anyone suggest a pair of nice, cartridge bearing platform pedals that are super smooth/watertight and durable but are not massive badass DH pedals?

Thanks,

Darren


I agree that make for a very bulky appearance, however the true BMX style pedals like the 50/50 offer the best over all comfort and confidence. If that is what she is used to, she may not be happy with anything with less surface area.

[dimsy]

origin 8 makes a lightweight alloy pair that are pretty decent.

http://www.origin-8.com/product_detail.php?short_code=CNC+PRO+Track&cl1=PEDALS

i believe they're toe clip compatible, i've used these and liked them but never tried them with toe clips.

[alancw3]

i am not sure how high quality these pedals are that came on my latest bike acquisition, a hybrid/city, but they have worked fine for me. in fact i have worn sandals all summer while doing rides up to 40 miles long. long and wide for my size 13 feet with no slippage. came on a specialized globe. not sure if you can buy at specialized dealer.

[xjoex]

I always liked WTB Momentum grease guard pedals. They look nice, and have the grease guard port for easy maintenance. Actually why did I sell mine...

http://www.rei.com/product/737650?preferredSku=7376500018&cm_mmc=cse_froogle-_-datafeed-_-product-_-7376500018&mr:trackingCode=287D4FFE-FB85-DE11-B7F3-0019B9C043EB&mr:referralID=NA
http://media.rei.com/media/741938.jpg

-Joe

[oliver1850]

.

[11.4]

I really like my SunTour XC Pros. Probably not the easiest thing to find now though.

Yes. Very nice but now they're collectible and quite rare, quite pricey. They are one of the few pedals actually made wide enough for normal feet. Probably the best recommendation on this thread, though you do have to find them. They show up on eBay pretty regularly.

[acorn_user]

I really like my SunTour XC Pros. Probably not the easiest thing to find now though.

Someone has a pair of Campagnolo Centaur mtb pedals on t'bay for $200...

[slowandsteady]

Kona Wah Wah pedals - dont even think about anything else!

Many MTB'ers are headed this route these days especially as we age and fear injuries more each year...sticky pedals are pretty darn good and it's amazing what youll attempt with them as opposed to being "stuck" in your clipless - like as you head up to a single log water crossing three feet off the ground, clipped in we hesitate and the "what-if" goes through your head, with the Wah Wah's you know your foot is on the log in a heartbeat so barely a hesitation as you go for it...

Check in some of the MTB boards and search for pedals you''ll find lots of recommendations for platforms from $20-$200
http://forums.mtbr.com/index.php
http://www.mtbr.com/cat/drivetrain/pedal/kona/wah-wah/PRD_417815_135crx.aspx

Great for everyday rides and cruising the roads in shoes, sneak or flips,,,

[d_douglas]

Yes, I think they need to be big pedals, though I am hoping for a big less bulky than the 5050s. She will not be using toe clips - platform all the way!

Super durable and low maintenance is key here - no Campy loose bearing - pretty-but-too-fussy - pedals here...

Thanks for all the replies.

PS yes, the WI pedals are WAY too expensive - no freakin way I would pay that!


I agree that make for a very bulky appearance, however the true BMX style pedals like the 50/50 offer the best over all comfort and confidence. If that is what she is used to, she may not be happy with anything with less surface area.

[d_douglas]

I saw these on Jeff Jones' bikes at the MAD bespoke exhibit and thought they were beautiful.

Has anyone used these? They are outta my price range methinks, but if anyone has a used pair (assuming they get good reviews) I might be interested.


The Kona Wah Wah pedals look like an affordable version of this new style of concave platform pedals....