PDA

View Full Version : FS: Gaulzetti Cicli Corsa, DV46cs, Powertap


Ryun
07-08-2010, 02:44 PM
Since I gave in to temptation and bought a nice 08 speedvagen from a fourmite I need to make room

The zetti drew the short straw.
It's the 53 with 56 tt. The long and low option
Seat mast is currently set at 755 height with an arione
Obviouly lower would work; probably not much more upward adjustment maybe .5 cm at most. 75 would be ideal
It is black with lime green logos. Very sharp. Some swirl marks in the paint and a scratch under one of the seat stays. Not perfect but very good condition for a race bike
Includes cane creek 110 headset and two forks
I have a gs 10 with steel steerer and brand new uncut cs20 just back from paint by the guys at Cirle A.
Open to a ton of options :
$1600 frame, forks, headset and campy bb30 adapotrs shipped
Also have a set of Cannondale hollowgram si cranks with ceramic bb just installed in 172.5 with campy 11sp fsa rings for an additional 600
I have an assortment of 11sp chorus and super record 11 bits if you need it built up.
Matching test arione is also available with the frame
If you want the build pictured $3600 without pedals.
That would include:
DV46 clinchers, Chorus 11sp shifters and der, record brakes. Hollowgram crankset, Mandible cages, arione saddle, Ergosum pro bars, and arx stem. Race ready out of the box.

Also have the wheelset available separately. A set of Reynolds DV46 clinchers with decals removed. LAced to DT 240s with decals also removed. Includes reynolds skewers but no cassette or tires. Campy compatible. Excellnt condition. Just Purchased from sokyroadie--$925 shipped

For sale: Excellent condition Powertap SL+ wheelset. Rear wheel is DT Rr 1.1 32h clincher with DT butted spokes in black. Less than 1000 miles. Campy freehub body. This is the ant+ model. No head unit or strap. (I use my garmin 500 with it). Front hub is matching cycle ops hub 28h laced to black rr 1.1 with dt revolutions. Excellent condition. No tires, skewers or cassette
$1000 shipped and paypal'd
Check preferred paypal ok with fees

dancinkozmo
07-08-2010, 02:52 PM
...so the center of BB to top of sadle is about 755 in the pic ?
...whats the drop from the saddle to the top of hbars ?
...also if you dont mind, the nose of saddle to center of hbar dist ?

thanks.

Ryun
07-08-2010, 03:00 PM
yep 755. If you take a level across the seat and drop a measuring tape straight down the drop to the tops of the bars it is 10cm with the setup shown. The other fork with carbon steerer is uncut
Nose to center of bar is 56cm with the 110 stem pictured. That is measuring along the angle

dancinkozmo
07-08-2010, 05:00 PM
...thanks for the info...lovely bike !

WeakRider
07-08-2010, 06:36 PM
Beautiful bike, Ryun. Too rich for my blood unfortunately. Perfect build--except it needs the green SI SL bolts.

Hehe.

Ryun
07-08-2010, 08:14 PM
i've got em just havent put them on yet

Ryun
07-10-2010, 10:36 AM
lowering the price and adding some options:
Frame, alpha q gs10 (pictured), cane creek headset--$1300 shipped in CONUS
adding the cannondal crankset--$1850
built with chorus 11sp as shown 12-25 cassette included without wheels, pedals, cages-$2700 shipped
built with chours 11sp and chorus cranks 12-25 cassette included without wheels, pedals, cages $2200 shipped

dancinkozmo
07-10-2010, 01:14 PM
...man thats tempting...i'd have snapped it up if it wasnt the "long low"...not sure i could get the bars high enough on this one without using a ridiculous amount of spacers....would ruin the looks of a beautiful machine. :bike:

Bruce K
07-10-2010, 01:18 PM
Me too. Hieght OK but the length is about 1.5 - 2 cm too long.

BK

Ryun
07-10-2010, 01:25 PM
A couple answers to questions I have been asked:
-the headtupe is 126mm and the seat angle is 73.10
-if the drop is too much, i do have the uncut fork with carbon steerer
-the mast will take any 34.9 topper. There are a couple different ones out there with varying amounts of setback.

I am always willing to listen to partial trades but here are the things I am most interested in at the moment:
Campy compatible clinchers. Dt240s would be ideal. neutrons work too
mv32c
ergosum team or ltd bars in 42cm
edge composites stem 110 or 120
3t arx team or ltd stem in 120
black and red arione cx or black arione cx with carbon rails

thanks
Ryun
rpavlicek@att.net