DT Swiss 240 Freehub swap

[r_mutt]

can anyone point me to exact instructions on swapping a shimano freehub on a dt swiss 240s to campy freehub? i can't seem to find it on the dt swiss website.

:beer:

[gone]

I've got a copy of the DT Swiss 240 technical manual but it's in PDF and I can't recall where I got it. PM me with an email address and I'll send it to you.

[JeffS]

http://www.dtswiss.com/getdoc/99a9c909-cc61-4fe4-b472-181391c86013/Datasheet.aspx

It's a mess because they picture so many different hubs and so many languages, but it's in there.

[r_mutt]

thanks-


:beer:

[Charles M]

40ish pages?

Some place in there is the word "PULL"...

:D

[oldpotatoe]

can anyone point me to exact instructions on swapping a shimano freehub on a dt swiss 240s to campy freehub? i can't seem to find it on the dt swiss website.

:beer:

Drive side axle end in axle vice...pull wheel off(axle end stays in axle vice). Slide freehub body off. Note position of notched discs and 2 springs. Clean, oil, replace 2 springs(one in freehub body, one in hub body-narrow part of spring 'cone' facing each other)...Campag freehub on, Campagnolo specific axle end on(should come with freehub body)..just push it on.

[r_mutt]

Drive side axle end in axle vice...pull wheel off(axle end stays in axle vice). Slide freehub body off. Note position of notched discs and 2 springs. Clean, oil, replace 2 springs(one in freehub body, one in hub body-narrow part of spring 'cone' facing each other)...Campag freehub on, Campagnolo specific axle end on(should come with freehub body)..just push it on.


thanks-

i was having difficulty using my hands as a vice. where do i find replacement springs- from DT or does the LBS stock them on hand? is this a crucial step?

[Volant]

Campag freehub on, Campagnolo specific axle end on(should come with freehub body)..just push it on.

Don't forget this!