View Full Version : Tape to stop cable rub
Cantdog
04-17-2010, 12:59 PM
What type of tape do folks recommend to stop potential cable rub on the headtube?
What type of tape do folks recommend to stop potential cable rub on the headtube?
Electrical works, but the car-bra material from 3M looks better and is more durable.
BdaGhisallo
04-17-2010, 01:43 PM
Go to your home centre and get the little adhesive velcro dots. They come in a few colors and the fuzzy part of the velcro is perfect for this application. I have a black frame so it's easy to get them to match.
chuckaw
04-17-2010, 01:47 PM
Been wrapping my cables with a thin turn ofself fusing silicone tape. Seems to work really well so far.
jmc22
04-17-2010, 02:22 PM
I went to the hardware store and purchased some inexpensive clear plastic tubing that is it soft & flexiable. I cut about a 2" length, then slit it down one side so I can wrap it around the cable housing without removing, when it gets dirty I replace it.
SteveV0983
04-17-2010, 03:19 PM
This stuff from Colorado Cyclist:
http://www.coloradocyclist.com/product/item/BKSVGY4K
You get enough to last a lifetime and it works great. And it will not peel off paint or decals.
ahumblecycler
04-17-2010, 07:26 PM
I use lizard skin on my BMC ... it is essentially clear except for a faded lizard.
I use glueless patches. They last forever.
rwsaunders
04-17-2010, 08:31 PM
I just cut small patches from a roll of Scotch packing tape.
fogrider
04-18-2010, 12:32 AM
if you run the cables to the opposite side and cross the cables under the downtube...you won't get cable rub at all.
alancw3
04-18-2010, 06:56 AM
I use glueless patches. They last forever.
+1 i bought mine at walmart for like $1. work great for cable rub, don't work at all as gluesless patches imho.
oldpotatoe
04-18-2010, 07:33 AM
What type of tape do folks recommend to stop potential cable rub on the headtube?
http://www.jensonusa.com/store/product/CA289B00-Jagwire+Tube+Tops+White+Housing+Covers.aspx
lurpy
04-18-2010, 08:54 AM
I prefer to use 3-5 O-rings on the cable housing itself. Same concept as the Jag-wire covers, but cleaner looking, imho.
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.