View Full Version : Hub compatibility question
Matt-H
09-14-2009, 11:44 AM
Fellow forumites,
I was hoping you could tell me if Hugi 240 hubs branded "Specialized S Works" circa '01-'02 are compatible with 10 speed SRAM. Any help is greatly appreciated!
Apologies for never including "Shimano compatible" 240 in my initial post. :o
Matt-H
09-16-2009, 02:21 PM
No knowledge of Hugi hubs of this vintage and SRAM 10 compatibility? Hard to believe I could stump this forum... :)
nahtnoj
09-16-2009, 02:29 PM
Are they compatible w/ 8/9/10 speed Shimano? If so, same thing.
Pete Serotta
09-16-2009, 02:36 PM
If is is SHIMANO compatible hub (not Campy) than the answer is yes SRAM will work fine.
Matt-H
09-16-2009, 03:08 PM
Thank you for the comments. Forgive my ignorance, but I always thought that a Shimano compatible hub (not necessarily a Shimano hub) was, as you have both said, also compatible with a SRAM cassette. Subsequently, I thought I read that Shimano hubs pre 2008 (I think) would not accomodate a SRAM cassette. So, I thought that older hubs from other manufacturers might also be incompatible with SRAM cassettes.
The only hubs that won't accept a SRAM cassette are the Shimano 7800 series with the larger OD aluminum splined cassette body and others that copied this briefly offered spline. IIRC that was '06-'07. The new 7850 hub returns to the old shallow spline design, that SRAM uses. If the hub is 8/9/10 compatible, then it has the shallow spline.
Matt-H
09-16-2009, 05:33 PM
Thanks for clarifying the issue, Dave!
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.