View Full Version : Who makes a strong 24 hole rim
Gothard
09-08-2009, 10:33 AM
Kind of a wierd question, but I have this freshly overhauled Edco rear hub, and I kind of would like to build it into a wheel.
So, who makes a STRONG rim with 24 drilling? I figure if I can get away with Neutrons and such, I should find a suitable rim.
KeithNYC
09-08-2009, 12:16 PM
Velocity Deep-V, DT Swiss R.R 1.2
Both heavy, but VERY strong
hokoman
09-08-2009, 02:40 PM
i have a set of king hubs in a 24/28 configuration and my choice is going to be to go with the 1.2's. i rode the deep v's on all my bikes back around 1995, and now i'm slowly moving over because they aren't any cheaper than other rims... and i like having a welded joint, not a pinned rim.
dekindy
09-08-2009, 03:43 PM
Velocity Deep-V, DT Swiss R.R 1.2
Both heavy, but VERY strong
+1.
DT Swiss R.R. 1.1 double eyelet?
hokoman
09-08-2009, 04:16 PM
+1.
DT Swiss R.R. 1.1 double eyelet?
they don't make a 24. i think over the counter rims with low spoke counts are limited to aero rims that are stronger.....that being said, the aerohead is also available. if i had $$$$$ edge carbon would be on my list!
cadence90
09-08-2009, 04:37 PM
Velocity Aerohead + Aerohead OC
Velocity Fusion
Velocity Deep-V
http://www.velocityusa.com/default.asp?contentID=586
sokyroadie
09-08-2009, 05:59 PM
Kinlin Niobium 30mm or 27mm= bombproof,fairly light and reasonably priced.
JB
SEABREEZE
09-08-2009, 06:31 PM
Velocity Deep-V, DT Swiss R.R 1.2
Both heavy, but VERY strongtX\
X 2
Add to that the 30mm Kinlin
SoCalSteve
09-08-2009, 06:51 PM
Edge Carbon, either clincher or tubular.
nuff said'
Steve
acorn_user
09-09-2009, 09:12 AM
How about something really deep? Try trawling ebay for Campagnolo Vento or Shamal type rims :) Unless you have to build them yourself. That might be a big chore....
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.