Suggestions for 31.6 seatpost?

[scottcw2]

I need a 31.6 post with some set-back. I see Deda makes the Metal Stick (http://www.harborcountrybike.com/DEDA_METAL_STICK_BLACK_31_6X350_ALLOY_SEATPOST_p/spst1377.htm) and the Zero100 (http://www.harborcountrybike.com/DEDA_ZERO_100_DARK_METAL_31_6X310_25MM_SETBACK_SEA _p/spst1374.htm).

Does anyone have any thoughts to share on these 2 posts? Any other suggestions?

[54ny77]

for what it's worth if you're buying a ritchey post....something i learned recently: if you get the ritchey wcs carbon single bolt seatpost and run a fizik aliante seat w/carbon rails (or most likely any fizik seat with carbon rails), you will need to get the special adaptor bolts in order to accommodate the larger diameter rails. they can be had from ritchey's website (or likely form whomever is selling you the seatpost).

you do not need such an adaptor on the wcs carbon 2-bolt post interface, however....or at least, my 2-bolt wcs carbon post fits the larger braided carbon rails just fine.

[Jack Brunk]

KCNC Scandium excellent post

[scottcw2]

KCNC Scandium excellent post

I am not finding one with set-back.

[nahtnoj]

Lots of people here seem to use Ritchey with success.

Personally I love Thomson, although some find the aesthetics of the setback models lacking.

[93legendti]

Easton EC70
Carbonlord

[Z3c]

I think the Syntace post is avail in 31.6; offers some setback and looks good IMHO.

[Jack Brunk]

I am not finding one with set-back.
Scott,

I have two that have set back. Check Fairwheel bikes for one in stock. They usually have them in stock. If not PM me and I can line a new one up for you unless you decide to go in a different direction.

[ahumblecycler]

Masterpiece set back or wait until Fizik's seat post comes out (I do not know when that is but it comes with 20 or 25 set back).

[ThasFACE]

Albert Bold

[bkboom123]

carbon lord carbon lord carbon lord

[scottcw2]

Found and ordered. Thanks everyone!


Scott,

I have two that have set back. Check Fairwheel bikes for one in stock. They usually have them in stock. If not PM me and I can line a new one up for you unless you decide to go in a different direction.